1. Manuals
  2. Brands
  3. kincrome Manuals
  4. Lawn and Garden Equipment
  5. K16000
  6. Owner's manual

kincrome K16000 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Instructions for Assembly, Testing, Operation, Servicing, and Storage
Kincrome Sprayers:
READ and UNDERSTAND the Owner's Manual completely before using this sprayer.
Assemble, test, and use only in accordance with the Owner's Manual instructions.
READ and FOLLOW chemical label instructions. Pesticides are hazardous chemicals.
KNOW emergency procedures BEFORE handling chemicals. Sprayer leaks, bodily
chemical contact, poisoning, and spills require immediate response.
AVOID inhaling, ingesting, or coming into contact with any chemicals.
WEAR personal protective gear when filling, using, cleaning, and servicing the
sprayer.
KEEP sprayer and spray materials away from children and pets. Pesticides are
especially toxic to them.
EXERCISE CAUTION in vehicle handling when towing/hauling a filled sprayer to avoid
loss of control or sprayer overturning.
DO NOT TURN ON POWER to sprayer until ready to spray in order to avoid unintentional
spray release.
Improper use of the sprayer or handling of chemicals could result in serious injury or
illness to the operator or nearby persons/animals, or could cause damage to the
environment.
** This sprayer is recommended for use in spraying non-flammable liquids such as pesticides,
water for plants/trees or dust control, ice control chemicals, or water-based non-flammable sealants
or stains for outdoor wood surfaces. However, WE RECOMMEND THAT THE SPRAYER NOT
BE USED FOR OTHER PURPOSES ONCE IT HAS BEEN USED FOR SPRAYING
PESTICIDES. Any chemical will leave some residual in the tank liner or sprayer components,
even after the sprayer has been properly cleaned. These residual chemicals can have unexpected
effects on future uses. For example, spraying water or other liquids that are contaminated with
residual pesticide may result in unforeseen hazards to plant or animal life.
Owner's Manual
For outdoor use with agricultural pesticides and other liquids**
Any Questions, Comments or Parts Orders
Call Kincrome Tools + Equipment 1300 657 528
MODEL NUMBER:
K16000, K16001, K16002
WARNING
M783010D

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the K16000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for kincrome K16000

  • Page 1 For example, spraying water or other liquids that are contaminated with residual pesticide may result in unforeseen hazards to plant or animal life. Any Questions, Comments or Parts Orders Call Kincrome Tools + Equipment 1300 657 528...
  • Page 2 Table of Contents...

  • Page 3: Table Of Contents

    Step One: Assess wind conditions and clear work area ..........25 Step Two: Fill the sprayer ..................25 Step Three: Operate the sprayer  Step 3.1: Model K16000 ..................27  Step 3.2 Models K16001, K16002 ..............28 Step Four: Clean sprayer and decontaminate after use ..........33 Storage............................

  • Page 4: Intended Use

    For example, spraying water or other liquids that are contaminated with residual pesticide may result in unforeseen hazards to plant or animal life. Contact Kincrome Tools + Equipment 1300 657 528 for any questions about the appropriate use of the sprayer and/or optional accessories.

  • Page 5: Summary Of Important Safety Information

    Summary of Important Safety Information WARNING Read and understand this owner’s manual completely before using the sprayer. Read each chemical label’s instructions before handling the chemical. Improper use of the sprayer or handling of chemicals could result in serious injury or illness for the operator or nearby persons/animals, or cause damage to the environment.

  • Page 6: Atv Vehicle Handling Safety

    Summary of Important Safety Information  DO NOT SPRAY when wind speed exceeds 6.5 kmh in order to minimize spray drift.  CLEAR work area of people/ pets and POST warning notices to restrict access for the period recommended on chemical label. ...
  • Page 7 Summary of Important Safety Information contaminated clothing per chemical label instructions. 2. Seek medical advice if instructed on the label or the victim experiences symptoms of harmful effects. Bring the chemical label for reference. Poisoning by In case of poisoning from ingestion or inhalation: ingestion or If the victim has collapsed or is not breathing, call 000.

  • Page 8: Warning Label Location

    Warning Label Location WARNING READ and UNDERSTAND the Owner’s Manual completely before using this sprayer. Assemble, test, and use only in accordance with the Owner’s Manual instructions. READ and FOLLOW chemical label instructions. Pesticides are hazardous chemicals, which must be handled carefully.

  • Page 9: Unpacking

    Note that some parts are shipped inside the tank.  If you have damaged components: Contact the freight company that delivered the unit and file a claim.  If you have missing components: Contact Kincrome Tools + Equipment 1300 657 528.

  • Page 10: Unpacking The Manual Bag

    Unpacking the Manual Bag The following items are found in the K16000 manual bag. Drain Cap Screw (3) Lance Clip (2) Rubber Washer Remote Switch Hose Guide Hose Clamp (2) The following items are found in K16001 and K16002 manual bags.

  • Page 11: Assembly

    Assembly Step One: Attach lance clips to tank Fasten the two lance clips to the sprayer tank with screws. Step Two: Attach drain cap to tank Press the rubber washer into the drain cap with your finger. Thread the drain cap onto the tank.

  • Page 12: Step Three: Attach Gun Hose To Pump

    Slide the hose clamp over the hose barb. iv) Tighten the hose clamp. 2. Attach one end of the gun hose to the pump hose barb. Model # K16001, K16002 Model # K16000 Hose clamp Gun hose Step Four: Attach hose guide to tank 1.

  • Page 13: Step Five: Attach Gun Hose To Spray Gun

    Tighten the hose clamp. 2. Attach the end of the gun hose to the gun hose barb. Hose barb Spray gun Hose clamp Gun hose **ATTENTION** Model K16000 continue with Step 9. Models K16001 and K16002 continue with Step 6.

  • Page 14: Step Six: Unpack And Inspect Parts From K16001 And K16002 Kit Bag

    Assembly (continued) Step Six: Unpack and inspect parts from K16001 and K16002 kit bag Step Seven: Attach broadcast bracket to tank Attach broadcast bracket to tank using (2) screws.

  • Page 15: Step Eight: Finish Broadcast Kit Assembly

    NOTE: If your vehicle battery will be inaccessible after the sprayer is attached, proceed to “Step Ten: Connect remote switch to vehicle battery” prior to performing this step Secure the sprayer tank to your ATV rack with two tank straps. Note: K16000 sprayer does not include tank straps.

  • Page 16: Step Ten: Connect Remote Switch To Vehicle Battery

    Assembly (continued) Step Ten: Connect remote switch to vehicle battery WARNING Batteries are hazardous because they contain caustic acid, can emit explosive gases, and can cause electric shock. Caution must be exercised when making connections to a battery to avoid shock and contact with the acid, and to prevent any sparking that could lead to an explosion.

  • Page 17: Step Eleven: Check And Test Completed Assembly

    Assembly (continued) AFTER EACH USE, disconnect power to the sprayer by disconnecting 6. Disconnect after use the sprayer’s pump cord from the remote switch – the remote switch may remain connected to the battery. NOTE: It is important to disconnect power to the sprayer when not in use for safety reasons.

  • Page 18: Machine Components

    Machine Components (Model # K16000) Hose Wrap. The hose wrap is built into the tank and provides a storage location for the gun hose Gun Hose. The 4.5m gun hose transfers chemical from the pump to the spray gun. Fill Cap. The fill cap has a vent to allow air to enter the tank as the chemical is dispensed.
  • Page 19 Machine Components (Model # K16001, K16002) Hose Wrap. The built-in hose wrap provides a storage location for the gun hose on the tank. Gun Hose. The 4.5m gun hose transfers chemical from the pump to the spray gun. Fill Cap. The fill cap has a vent to allow air to enter the tank as the chemical is dispensed.

  • Page 20: Important Safety Information - Operation

    Operation – Important Safety Information Now that you have completed and tested your assembly, there is some important safety and health information you need to know with regard to handling and spraying chemicals, as well as vehicle handling with the sprayer attached. WARNING Carefully read and make sure you understand the following safety information before using the sprayer.

  • Page 21: Chemical Application Safety

    Operation – Important Safety Information (continued) Chemical Application Safety: WARNING Caution must be used when spraying chemicals to avoid unsafe exposure to humans and the environment. Heed the warnings below and follow all instructions carefully. Before Spraying  Sprayer prep. ALWAYS inspect and prepare the sprayer before use according to the directions provided in this manual.

  • Page 22: Atv Vehicle Handling Safety

    Operation – Important Safety Information (continued) ATV Vehicle Handling Safety: WARNING Serious injury can occur if the ATV on which the sprayer is mounted is driven unsafely.  Driver age. You must be 16 years of age or older to operate the ATV with the sprayer attached.
  • Page 23 Operation – Important Safety Information (continued) 2. Seek medical advice if instructed on the label, or if the victim experiences symptoms of harmful effects such as burning, swelling, nausea, chest pain, difficulty breathing, dizziness or confusion. When seeking medical advice, be sure to bring the chemical product label. Poisoning by In case of poisoning from ingestion or inhalation: ingestion or...

  • Page 24: Preparing The Sprayer For Each Use

    Inspect tank and fittings for cracks and leaks. Replace all damaged fittings with original Kincrome parts. Check to be sure retaining nut on gun nozzle is tight. Check to be sure all other nuts, bolts, and screws are tight.

  • Page 25: Step One: Assess Wind Conditions And Clear Work Area

    Operation – Using the Sprayer Step One: Assess wind conditions and clear work area. Before you decide to spray, you must determine whether wind conditions are suitable. You must also restrict access to the work area to ensure the safety of bystanders. WARNING Do not spray if wind speeds are greater than 6.5 kmh or if there are bystanders in the intended spray area.
  • Page 26 Determine chemical and water volumes needed for the planned application, taking into consideration that maximum tank capacity is 38 litre for item K16000. 60 litre for K16001 and 98 litre for K16002. Note: Only purchase and mix as much chemical as you need for the planned application in order to minimize chemical over application and the need for storing unused chemicals.

  • Page 27: Step Three: Operate The Sprayer

    Some formulations of liquid pesticides do not remain in solution and if needed should be agitated to maintain a uniform mix. Contact Kincrome Tools + Equipment 1300 657 528 for any questions about the appropriate use of the sprayer and/or optional accessories.

  • Page 28: Step 3.2 Models K16001, K16002

    - Return to service area to review instructions for troubleshooting before attempting to service. Note: A reserve, clean container capable of holding at least 38 litres – model K16000, 60 litres – model K16001, 98 litres – model K16002 should be kept for use when the sprayer tank needs to be emptied temporarily for repairs Step 3.2: Operate the broadcast sprayer.
  • Page 29 Some formulations of liquid pesticides do not remain in solution and if needed should be agitated to maintain a uniform mix. Contact Kincrome Tools + Equipment 1300 657 528 for any questions about the appropriate use of the sprayer and/or optional accessories. 6. Squeeze trigger To spray, squeeze the gun trigger.
  • Page 30 Operation – Using the Sprayer (continued) 7. Operate Move broadcast lance into the broadcast position broadcast Ensure power to the pump is off, then lift the broadcast lance out of its stored position and click the lance into its broadcast position. spraying system Stored position...
  • Page 31 Operation – Using the Sprayer (continued) Ensure correct spray pattern Rotate the broadcast nozzle, if needed, so that the spray pattern is pointed down evenly distributed. Note: It is not unusual for the operator to be exposed to chemical drips while adjusting the broadcast nozzle.
  • Page 32 - Return to service area to review instructions for troubleshooting before attempting to service. Note: A reserve, clean container capable of holding at least 38 litre (model K16000), 60 litre (model K16001), 98 litre (model K16002) should be kept for use when the sprayer tank needs to be emptied temporarily for repairs.

  • Page 33: Step Four: Clean Sprayer And Decontaminate After Use

    Operation – Using the Sprayer (continued) Step Four: Clean sprayer and decontaminate after use. When done using the sprayer, it is important to clean the sprayer and decontaminate yourself. Do not store the sprayer with chemicals in the tank, as it is unsafe and could also result in damage to the equipment.

  • Page 34: Storage

    Storage Prepare the sprayer for end-of-season storage by running antifreeze through the system. This will keep internal parts lubricated, protect against corrosion, and keep the unit from freezing. CAUTION The sprayer will be damaged if it freezes. Protect the sprayer from freezing during storage by following the instructions below. Preparing for storage: 1.

  • Page 35: Troubleshooting

    Note: A reserve, clean container capable of holding at least 38 litres (model K16000), 60litres (model K16001), 98 litres (model K16002) should be kept for use when the sprayer tank needs to be emptied temporarily for repairs The container should be properly labeled as to its contents if it is used.

  • Page 36: Specifications

    The manufacturer reserves the right to make improvements in design and/or changes in specifications at any time without incurring any obligation to install them on units previously sold. Any Questions, Comments or Parts Orders Call Kincrome Tools + Equipment 1300 657 528...

  • Page 37: Parts Breakdown - Exploded View

    Exploded View – K16000 / K16001 / K16002 – Rev D Item Part# Description Model Item Part# Description Model K16000-1 Spray gun Drain cap K16000-10 K16000 Gasket K16000-2 Hose clamp K16001, K16002 K16000-11 38 Litre Tank K16000 K16001-10 60 Litre Tank...

  • Page 38: Appendix A: Broadcast Spray Calibration Tables

    Appendix A – Broadcast Spray Calibration Tables Models K16001 & K16002 Below are some guidelines to help you calibrate your broadcast sprayer. This is a very important step in operating the broadcast sprayer such that too much or too little chemical may be applied. Using Table 1, find a table that corresponds with the chemical manufacturer’s suggested application rate (litres per hectare, litres per 100 sq.m or litres per 10 sq.m).

  • Page 39: Limited Warranty

    Any misuse, abuse, alteration or improper installation or operations will void warranty. Determining whether a part is to be replaced or repaired is the sole decision of Kincrome. NOTE: Some services performed by parties other than Kincrome may void warranty.
  • Page 40 Distributed by Kincrome Tools + Equipment 3 Lakeview Drive, Caribbean Business Park, Scoresby, Vic 3179 Australia www.kincrome.com.au...

This manual is also suitable for:

K16001K16002

Table of Contents