Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for kincrome KP15002
- Page 1 PLASTIC WELDING KIT PLASTIC WELDING INCLUDES INCLUDES WELD & REPAIR INCLUDES AUTOMOTIVE, BLACK STAINLESS ELECTRONICS, & WHITE STEEL APPLIANCES & REINFORCING PP, PE, PS & ABS ACCESSORIES MORE! MESH WELDING RODS KP15002 ED1 JULY 2016...
-
Page 2: Specifications
9. Welding Tip Retaining Screw 10. Welding Rod Feeder Hole Specifications Model No: ....................KP15002 Plastic Welding Rods Length (3 Pcs Black & 3 Pcs White) ....170mm X 4mm Ø PE (Polyethylene) Melting Temperature ..........70-75 °C PS (Polystyrene) Melting Temperature ..........95 °C PP (Polypropylene) Melting Temperature ..........140 °C... -
Page 3: General Safety Warnings
Note: The below safety instructions are applicable to the use of the KP15001 Gas Soldering Iron. KP15001 Gas Soldering Iron is not supplied in the KP15002 Plastic Welding kit & must be purchased separately. Read and follow operating instructions and warnings and familiarize yourself with the gas soldering iron before lighting or using. -
Page 4: Common Uses
UNPACKING Unpack all the components from the box. Note: The KP15002 Plastic Welding Kit is NOT supplied with a soldering iron that is required for plastics welding or plastic repairs to be achieved. When unpacking the KP15002 Plastic Welding Kit, carefully inspect for any damage that may have occurred during transit. - Page 5 (Any costs associated in the identification of your plastic material, will not covered by Kincrome). If possible, keep samples of plastic materials that you already know to compare with the unknown plastic you are trying to weld or repair.
- Page 6 ASSEMBLY OF THE WELDING TOOL Note: Gas soldering Iron is not included within this kit. KP15001 can be purchased serperatly from your local Kincrome stockist. The KP15002 Kincrome Plastic Welding Kit can be used with the KP15001 Kincrome Gas Soldering Iron kit or various other gas soldering irons.
- Page 7 The KP15002 Plastics Welding Kit is supplied with 3 sheets of stainless steel reinforcing mesh, that can be used to reinforce larger repairs such as cracks, holes or deep gouges in your project. The stainless steel reinforcing mesh sheets can be cut, shaped or moulded into almost any shape to suit your repair needs.
-
Page 8: Cleaning And Maintenance
Ensure that all Welding Tips have cooled off before storing back into the supplied protective case. Store KP15002 components and accessories in the protective case. SPARE PARTS For a full list of available spare parts for this item visit the Kincrome website kincrome com.au or alternatively contact Kincrome Customer Service. RELATED PRODUCTS AND CONSUMABLE ACCESSORIES •... -
Page 9: Caring For The Environment
PLASTIC WELDING KIT CARING FOR THE ENVIRONMENT When a tool is no longer usable it should not be disposed of with household waste, but in an environmentally friendly way. Please recycle where facilities exist. Check with your local council authority for recycling advice. Recycling packaging reduces the need for landfill and raw materials. - Page 10 www.kincrome.com.au...
Need help?
Do you have a question about the KP15002 and is the answer not in the manual?
Questions and answers