Sony VAIO Digital Studio VGC-RA930G Series Quick Start Manual page 72

VAIO Computer Quick Start
To connect the remote sensor control
1 Plug the remote sensor control's cable into either jack (1 or 2) located on the
back of the remote sensor.
✍
When you attach the remote control sensor to a cable or satellite set-top box, you can
control the set-top box functions with your remote control.
Connecting the remote sensor and remote sensor control
Remote sensor
control cable
2 Remove the adhesive tape cover, located on the bottom of the remote sensor
control.
3 Press the remote sensor control onto the set-top box near the infrared port,
without covering the port.
✍
If the remote sensor control covers the infrared port on the set-top box, you cannot
use the remote control supplied with the set-top box.
72
2
1
Remote sensor