Samsung DV90TA240AE User Manual page 21

Heat pump dryer
Table of Contents

Advertisement

Location requirements
Select a level, well-constructed surface that will withstand vibrations. Select a
location where a grounded, 3-prong outlet is easily accessible.
WARNING
• Install the dryer indoors only.
• Do not install the dryer in areas exposed to the weather.
• Do not install the dryer where the temperature may fall below 5 °C or rise above
35 °C.
• Do not install the dryer where gas may leak.
• Do not block the cooling grill's air inlet located at the dryer front.
Alcove or closet installation
For alcove or closet installation, the dryer requires the following minimum
clearances:
Sides
25 mm
If installing the dryer with a washer, the front of the alcove or closet must have an
unobstructed air opening of at least 490 mm.
Electrical and grounding requirements
• The dryer requires an AC 220-240 V / 50 Hz electrical supply.
• The dryer must be properly grounded. If the dryer malfunctions or breaks
down, grounding reduces the risk of electric shock by providing a path of least
resistance for the electric current. The dryer comes with a power cord that has
a 3-prong grounding plug. The plug must be plugged into an appropriate outlet
that is properly installed and grounded in accordance with all local codes and
ordinances.
• If you have any questions regarding the electrical or grounding requirements,
please contact Samsung or a qualified electrician.
DV5000T_DC68-04209F-00_EN.indd 21
Top
25 mm
490 mm
Front
Rear
51 mm
English 21 
2020/9/8 14:05:09

Advertisement

Table of Contents
loading

Table of Contents