Advertisement
Installation Guide
Installation varies slightly depending on whether you have a solenoid valve model
®
Chemigem
Chemigem D10 or a dosing pump model. The different methods of installation
are described below, and illustrated on page 7 (Solenoid valve model) and page 8 (dosing
pump model).
Choosing a good location
The Chemigem D10 is manufactured from weather resistant materials and is designed for
operation in full sun and rain. However, your Chemigem D10 will benefit if it is protected
from the weather. The Chemigem D10 Power Supply should not be mounted close to
where chemicals are stored (eg acid and chlorine) as vapours from these chemicals are
corrosive and may damage the electronic controls within the unit.
Insect intrusion (particularly ants) can cause problems with all equipment. Ensure that the
pool equipment area is kept free of insects as much as possible. Insect intrusion is not
covered under the warranty.
Page 6
Advertisement
