Sony VAIO PCV-RX740 Reference Manual page 57

9
Slide the drive holder back into the chassis so that the edge of the
holder is flush with the chassis.
10
Push in on the tab (A) to securely latch the holder to the chassis.
11
Connect the inner drive cable connector (B) to the first drive.
12
Connect the outer drive cable connector (C) to the second drive.
13
Connect the first power connector (D) to the first drive.
14
Connect the second power connector (E) to the second drive.
15
Replace the side panel (see
16
Reconnect the power cord to the system and then turn on your
computer.
Upgrading and Maintaining Components
B
"Replacing the Side Panel"
C
E
D
A
Drive connectors
Power connectors
Tab
Disk drive holder
on page 25).
43