On/Off Switch - Craftsman 74822 Operator's Manual

MINIMUM WIRE GAUGE
RECOMMENDATIONS
100 FT.
A.IW4G.*
*American Wire Gauge
Secure the extension cord to the unit by
threading the cord through the cord re-
tainer (see illustration). Insert the cord
receptacle into the recessed plug.
CAUTION: Failure to use cord retain-
er could result in damage to the unit,
extension cord, or both.
Cord
Receptacl_
°°tl,
Recessed
KNOW YOUR ELECTRIC BLOWER
READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT. Compare the illustrations to your unit to familiarize yourself with the location
of the various controls and adjustments. Save this manual for future reference.
ON/OFF Switch ....
Cord \ Y _2t_-_ Air Vents
Retainer _ ( \\
,
_' Upper vacuum
Handle
Inlet Cover Retaining Post
Latch
Blower Tube
._let Restrictor
Collection Bag
Elbow
Tube
Tube
Vacuum Assist Handle
Upper Vacuum Tube
Lower Vacuum Tube
_// =:====i
/
z
ON/OFF SWITCH
The ON/OFF SWITCH is used to acti-
vate the motor.
INLET COVER LATCH
The INLET COVER LATCH is used to
open and close the inlet cover and to
secure the upper vacuum tube to the
blower unit.
BLOWER TUBE
The BLOWER TUBE is designed to di-
rect the flow of air.
INLET RESTRICTOR
The INLET RESTRICTOR improves the
blower function.
TUBE RELEASE BUTTON
The TUBE RELEASE BUqq-ONsecures
the blower tube or elbow tube to the
blower unit during operation. Also,
pressing the tube release button allows
removal of the blower tube or elbow
tube.