Advertisement
Quick Links
Quick start guide
HDMI® Audio Extractor
HD2A
FR: Guide de l'utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l'uso - it.startech.com
Packaging contents
• 1 x HDMI audio extractor
• 1 x USB power cable
• 1 x Toslink adapter
• 1x quick install guide
System requirements
• HDMI source device (e.g. Blu-ray player, computer)
• SPDIF or 3.5mm audio destination device, such as an audio
receiver or speakers
• HDMI cabling for the source device
• SPDIF or 3.5mm audio cabling for the destination device
Operating system requirements are subject to change. For the latest
requirements, please visit www.startech.com/HD2A..
Specifications
Maximum supported
resolution for video
Up to 1920 x 1200 or 1080p
pass-through
SPDIF audio – up to 2.1 surround sound
Audio specifications
3.5mm audio – 2-channel stereo
Operation notes
• The USB power source port must be connected to a USB power
source such as a computer or a USB power adapter. This is required
in all configurations for the adapter to operate.
• For SPDIF audio, connect the included Toslink adapter to the
3.5mm analog and SPDIF output port, then connect your SPDIF
cabling to the adapter.
• If, once connected, the output of your destination device plays
static with no audio, it's likely your source device is set to bit
stream audio (unprocessed). As a result it will be necessary to
adjust this setting to PCM (Pulse-code modulation) in the output
settings of your audio source device. Please consult the manual
included with your HDMI source device for instructions.
For the latest information, technical specifications, and support for
this product, please visit www.startech.com/HD2A.
• If an HDMI audio source that's higher than 2.1-channel is sent
through the adapter, it will not be audible. It will be necessary to
adjust this setting in your video source to output to 2.1 channel.
Product Overview
Front View
HDMI input port
Left side and back view
Power switch
Right side view
USB power source
*actual product may vary from photos
HDMI output port
3.5mm analog
and SPDIF
output port
Manual Revision: 10/06/2015
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for StarTech.com HD2A
- Page 1 HDMI® Audio Extractor HD2A • If an HDMI audio source that’s higher than 2.1-channel is sent FR: Guide de l’utilisateur - fr.startech.com through the adapter, it will not be audible. It will be necessary to DE: Bedienungsanleitung - de.startech.com adjust this setting in your video source to output to 2.1 channel.
- Page 2 This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question.
Need help?
Do you have a question about the HD2A and is the answer not in the manual?
Questions and answers