LG 32HL714S-W Owner's Manual page 50

34. [Failover Input Switch] (Command: k z)
▶ Controls the Failover Input Switch function.
Transmission (k)(z)( )(Set ID)( )(Data)(Cr)
Data
00: [Off]
Ack (z)( )(Set ID)( )(OK/NG)(Data)(x)
35. [Main Input] (Command: k v)
▶ Controls the input of the Failover Main.
Transmission (k)(v)( )(Set ID)( )(Data)(Cr)
Data
00:
02:
Ack (v)( )(Set ID)( )(OK/NG)(Data)(x)
36. [Failover Input] (Command: k w)
▶ Controls the input of the Failover.
Transmission (k)(w)( )(Set ID)( )(Data)(Cr)
Data
00:
02:
Ack (w)( )(Set ID)( )(OK/NG)(Data)(x)
50
01: [On]
01:
03:
01:
03:
37. [SDI Mode] (Command: x x)
▶ Selects among the SDI signal processing modes.
Transmission (x)(x)( )(Set ID)( )(Data)(Cr)
Data
00: [Single1]
02: [Single3]
04: [12G 2-SI(QUAD Link)]
06: [SFP]
Ack (x)( )(Set ID)( )(OK/NG)(Data)(x)
38. [SDI Failover] (Command: k x)
▶ Controls the SDI Failover function.
Transmission (k)(x)( )(Set ID)( )(Data)(Cr)
Data
00: [Off]
Ack (x)( )(Set ID)( )(OK/NG)(Data)(x)
01: [Single2]
03: [Single4]
05: [12G Square(QUAD Link)]
01: [On]