Daily Use - AEG DCE5260HM User Manual

Function
1
Lamp
First speed / Off
2
3
Second speed
4
Third speed
Maximum speed
5
Filter notification
6
Hob²Hood
7

5. DAILY USE

5.1 Using the hood
Check the recommended speed according to
the table below.
While heating up food, cooking with covered pots.
While cooking with covered pots on multiple cooking zones or
burners, gentle frying.
While boiling and frying big quantities of food without a lid, cooking
on multiple cooking zones or burners.
While boiling and frying big quantities of food without a lid, big hu‐
midity.
It is recommended to leave the hood
operating for approximately 15 minutes
after cooking.
To operate the hood:
1. Press the first speed button
on the appliance.
2. If needed, press the light button
illuminate the cooking surface. The light is
dimmable. Press again the button to
change the intensity from:
a. Maximum,
b. Medium,
c. Low,
Description
Turns the lights on and off.
The motor switches to first speed level. Second press turns off the ap‐
pliance.
The motor switches to second speed level.
The motor switches to third speed level.
The motor switches to maximum speed level. After 5 minutes appli‐
ance switches to third speed.
Reminds to change or clean the charcoal filter and clean the grease
filter.
Indicator of the function to control hood from hob. For some models
the symbol present on the control panel.
d. Off.
3. If needed, change the speed by pressing
the desired button.
To turn off the appliance press the first speed
button
5.2 Hob²Hood function
to switch
It is an automatic function which connects the
hob with a hood. Both the hob and the hood
to have an infrared signal communicator. Speed
of the fan is defined automatically on basis of
mode setting and temperature of the hottest
cookware on the hob. You can also operate
the fan using the hob manually. The function
can be activated from panel of the hob.
58
again.