Wyrestorm CAM-210-PTZ Quick Start Manual

1080p60 PTZ Camera with USB 3.0,
HDMI Out, Auto Framing
CAM-210-PTZ
WyreStorm recommends reading through this document in its entirety to become familiar with the product's features prior to starting the
installation process.

IMPORTANT! Installation Requirements

• Visit the product page to download the latest firmware, document version, additional documentation, and configuration tools.
• Read through the

Wiring and Connections

In the Box

1x CAM-210-PTZ Camera
1x 12V DC 1A PSU (US/UK/EU/AU)
1x IR Remote
1x Wall Mount
1x 2m 8 pin Mini Din RS-232 Cable
1x 1.5m USB 3.0 Type B Host Cable
1x QuickStart Guide
Wiring and Connections
WyreStorm recommends that all wiring for the installation is run and terminated prior to making connections to the switcher. Read through this section in it's
entirety before running or terminating the wires to ensure proper operation and to avoid damaging equipment.

IMPORTANT! Wiring Guidelines

• The use of patch panels, wall plates, cable extenders, kinks in cables, and
electrical or environmental interference will have an adverse effect on
signal transmission which may limit performance. Steps should be taken
to minimize or remove these factors completely during installation for best
results.

Software Device Setup

Connecting To Zoom

To connect the WyreStorm CAM-210-PTZ to your Zoom software, first navigate to your settings pane which can be found by clicking the gear icon in the top
right hand corner, then click on the Video tab. Here you can change the camera device by using the dropdown menus. Select WyreStorm CAM-210-PTZ under
the applicable options.
WyreStorm CAM-210-PTZ
Copyright © 2023 WyreStorm ProAV Corporation |
CAM-210-PTZ Quickstart Guide | 230209
section for important wiring guidelines before creating or choosing premade cables.

Basic Wiring Diagram

o u
s R
l e s
i r e
W
wyrestorm.com
e
v i c
D e
l a y
s p
D i
P e
t e r
KEY
USB 3.0 Ethernet
HDMI
• WyreStorm recommends the use of shielded category cable to minimize
signal noise and interference.
• WyreStorm recommends using pre-terminated cables due to the
complexity of these connector types. Using pre-terminated cables will
ensure that these connections are accurate and will not interfere with the
performance of the product.
UK: +44 (0) 1793 676 683 | ROW: 844.280.WYRE (9973)
1 of 2
Quickstart Guide
t e r
p u
o m
l C
n a
r s o
support@wyrestorm.com