Advertisement
PS200
PORTABLE POWER STATION
19V
2A
Input
Power
Indicator
Power
Button
CHARGING YOUR
PS200 PORTABLE POWER STATION
Before using or storing, plug your PS200 Portable Power Station by 19V/2A adapter
into the wall until it is fully charged. If at any point when 1st LED blinking from your
PS200 Portable Power Station, plug it into a power source, like an AC outlet or a
solar panel, as soon as possible. This built-in warning indicator is to help prevent
battery damage when the charge gets low.
Power LED Indicators: The power LED indicator indicates the charge level of your
PS200 Portable Power Station. There are 4 segments to the battery, approximating
25% - 50% - 75% -100% capacity. As you use your PS200 Portable Power Station,
indicating the remaining charge.
When charging your PS200 Portable Power Station you will notice a battery
segment blinking at a 1 second interval. This indicates the current charge status.
Once your PS200 Portable Power Station is fully charged, all battery segments will
be lit and remain solid.
Charging from Solar Panel
The PS200 Portable Power Station charging port is located on the top-left corner
of the faceplate. This DC port is designed to work with our solar panels and is
capable of taking in 19V output of solar.
1. Place your solar panel where it will get as much direct sunlight as possible.
2. Connect with solar panel to DC INPUT port on the front of the PS200 Portable
Power Station. You will know the PS200 Portable Power Station is charging when
AC Power
the blue LED light next to the INPUT port lights up, and the battery LED indicator
Indicator
is blinking. The PS200 Portable Power Station is fully charged when all battery
segments stop blinking and remain solid.
AC Power
Output
PD 45W
Dual USB
5V
2.4A
Output
Solar Panel
PS200 Portable
Power Station
3-5
Recharges
LAPTOP
Advertisement
