The Display And It's Symbols; Button Functions; Functions And Operations - Energetics CT 2.6 Computer Manual

Computer Instructions

THE DISPLAY AND IT'S SYMBOLS

Speed (Km/h)
Time (min; sec)
Distance (Km)
SET – to confirm the selection
or value & increase the
parameters
MODE – scans through
display functions

BUTTON FUNCTIONS

MODE 1. Press the button to select TIME, DISTANCE and CAL to preset, and enter after setting. .
2. Press the button to scan trough the values in the display (Time – Calories – Odometer –
Pulse - Speed - Distance).
3. Press the button and hold for 2 seconds to reset all values to zero (except odometer).
SET To adjust the target value of TIME, DISTANCE and CAL.
Press the button and hold for 2 seconds to speed up the increasing.
RESET Press the button to reset the value.
Press the button and hold for 2 seconds to reset all values to zero (except odometer).
FUNCTIONS & OPERATIONS
1. Batteries Installation
Insert 2 pieces of AA 1.5V batteries in the battery case on the back of monitor.
Whenever batteries are removed or replaced, all values will be reset to zero except for the odometer.
2. Auto On/Off
While the user starts to do exercise, the display will show the workout value automatically. If the computer
does not receive a signal for more than 8 minutes the display will turn off automatically. All values are reset
to zero except for the odometer which will accumulate the total distance continuously.
3. Auto Scan
After the monitor is switched on, the LCD will display all values such as Time-Calories-Odometer-Pulse-
Speed- Distance alternating every 6 seconds.
4. Speed
Read out of the current speed in kilometres per hour, range from 0-99.9.
5. Distance
An individual target distance may be preset by pressing MODE button. To adjust the value press SET
button, each key touch increases the value by 0.1 KM, hold the SET button for 2 seconds for fast increase.
Confirm the target setting by pressing MODE button. The display automatically shows the count down from
the target value to zero during exercise. If no target distance is preset, the distance counts up to 999.9 km.
3
Odometer accumulates total
distance (km)
Pulse (beats per minute)
Calories burned
RESET – to set all values
back to zero (hold button)
EN