Sharp SMC0760HW Operation Manual page 15

C O N T R O L S
MULTI-STAGE COOKING
At most, 2 stages can be set for cooking. In multi-stage cooking, if one stage is defrosting, then defrosting
shall be placed at the first stage automatically.
Note: Auto cooking cannot work in the multi-stage cooking.
Example: if you want to cook with 80% microwave power for 5 minutes + 60% microwave power for 10
minutes. The cooking steps are as following:
(1) Press "TIME COOK" once, then press "5","0","0" to set the cooking time;
(2) Press "POWER LEVEL" once, then press "8" to select 80% microwave power.
(3) Press "TIME COOK" once, then press "1","0","0","0" to set the cooking time;
(4) Press "POWER LEVEL" once, then press "6" to select 60% microwave power.
(5) Press "START/ +30 SEC." to start cooking.
MEMORY FUNCTION
(1) Press "0/MEMORY" repeatedly to choose memory setting 1-3. The display will show 1,2,3.
(2) If the setting has been program ed, press " START/ +30 SEC." to use it. If not,
with your favorite program.
(3) After finishing the setting, press "START/ +30 SEC." once to save the setting. Press " START/ +30 SEC."
again, it will start cooking.
Example: to program the following setting as the second memory to cook food with 80% microwave power
for 3 minutes and 20 seconds.
The steps are as follows:
a. In waiting state, press " 0/MEMORY" twice, the screen displays "2".
b. Press "TIME COOK" once, then press "3", "2", "0" in order.
c. Press "POWER LEVEL" once, "PL10" displays, then press "8" and "PL8" displays.
d. Press "START/ +30 SEC." to save the setting. Buzzer sounds once and the LED will display "2". If you press
"START/+30SEC." again, the setting will be saved as memory 2 and it will start cooking.
e. If power is lost, the "0/MEMORY" setting will need to be reprogram e .
f. If you want to run the saved setting, in waiting state, press "0/MEMORY" twice, screen displays "2", then
press "START/+30SEC." to run.
m
Please note: only one or two stages can be set.
15
create the memory setting
m d