Contents Introduction Features Overview Instructions Assembly Instructions Complete systems supplied by Delta-T Quick Summary of Operation Setting up the Self Levelling Mount Using the Canon EOS 5D Camera Taking Hemiphotos Image size and compression Camera settings Exposure Taking the Picture Use of other Canon Remote controls Downloading images to a PC Trouble Shooting...
North. This is necessary for taking hemispherical photos for use with Delta-T’s HemiView canopy analysis software. The SLM7 is designed for use with the Canon 5D full-frame digital SLR camera with a Sigma EX-DG 8mm full circle fisheye lens.
Overview Fig 1 North Bubble Sigma South Gimbals marker level EXDG lens marker Canon Flash Fibre op tics Compass Tripod EOS 5D adapter light pi Balance weights Camera mounting bracket SLM7 User Manual v 1 Overview...
Open, review, annotate, classify and sort images on your PC in Canon ZoomBrowser software as required. Process and analyse selected images in HemiView on your PC. For step 9 refer also to the HemiView User Manual and online help. Assembly Instructions SLM7 User Manual v 1...
Rotate the mount to point North. Level the mount using the balance weights and bubble level indicator. Balance weights Check the flash adapter and fibre optics are in place. SLM7 User Manual v 1 Setting up the Self Levelling Mount...
LCD monitor and toggle the INFO button to display image information, including a histogram. If the image is overexposed, the sky areas will have a tendency to spread in SLM7 User Manual v 1 Taking Hemiphotos...
Page 10
– which, of course, is not always so! So we suggest, when working in auto exposure mode, to auto-bracket the exposure and pick the best picture with the clearest canopy edges. Taking Hemiphotos SLM7 User Manual v 1...
Page 11
Note the time stamp and the auto exposure setting changes. Incidentally, the dark evergreen tree, lower left, dominates the dark end of these histograms. Depending on your objectives, you might want to edit it out (in Photoshop, say) before using HemiView. SLM7 User Manual v 1 Taking Hemiphotos...
Canon EOS Software Instruction Manual for: • Canon software installation instructions • Instructions on using the USB cable, • Instructions of acquiring images from the camera under PC control • Trouble Shooting Canon software Taking Hemiphotos SLM7 User Manual v 1...
Page 13
Image appears in ZoomBrowser. Inspect the picture to see if you need to take another In HemiView select File, Open to open the image Process as per HemiView User Manual SLM7 User Manual v 1 Taking Hemiphotos...
Trouble Shooting Refer to the Trouble Shooting section of the Canon EOS Software Instructions Manual. Downloading images to a PC SLM7 User Manual v 1...
Align the horizon circle to the shoulders of the two alignment markers, with the pointed marker at the magnetic north point, as shown below. Note: with SLM7 the camera orientation is fixed All images are aligned with North-South horizontal and North on the left.
When you exit HemiView, this lens will be saved in the HemiView lenses.csv file. When using HemiView, specify these lens properties for all hemiphotos taken with the Canon EOS 5D and Sigma 8mm EX DG lens. Trouble Shooting SLM7 User Manual v 1...
Appendix Assembly of HemiView system parts Attach the SLM7 Self Levelling Mount to a camera tripod for stability, using the tripod socket in its base. Attach the Sigma EX-DG fisheye lens to a Canon EOS 5D camera as described in the camera and lens manuals.
Delta-T shall not be liable to the buyer by reason of any delay or failure to perform their obligations in relation to the goods and/or services if the delay or failure was due to any cause beyond the Delta-T’s reasonable control. Terms and Conditions of Sale SLM7 User Manual v 1...
Need help?
Do you have a question about the SLM7 and is the answer not in the manual?
Questions and answers