Sound Appeal SA-BLAST5-W, SA-BLAST6-W, SA-BLAST6-BL - Loudspeaker Manual

SPECIFICATIONS

To ensure you get the most out of your new speakers, please take a moment to read this manual before you get started.

PACKAGE CONTENTS

Speaker AC Adapter Speaker Cable (20 feet length)

Speakers Installation

These indoor/outdoor weatherproof loudspeakers are manufactured to resist a variety of weather conditions. Snow, rain and sun (not to be submerged under water). Pairing Speaker For durability / longevity we do recommend removing the speakers from the brackets and placing inside during extended extreme temperatures over 120 degrees and below 0 degrees. The most ideal place to install these speakers is under the overhangs as they provide the best protection. Like all speakers, they sound the best when placed no more than eight feet apart from each other, and slightly higher than ear level. When choosing the speaker location - consider the location of the power source. The powered Speaker AC Adapter speaker should be placed near the power source. The passive speaker could be placed further away and should be connected to the powered speaker.

1. LED
2. DC IN 2: DC IN (POWER)
3. RIGHT SPEAKER OUTPUT
4. ON/OFF SWITCH

WIRING

When connecting the speakers, it is very important to observe the correct polarity. This means that the wire attached to the (+), red, or positive terminals on one component must be attached to the (+), red, or positive terminal on the corresponding component speaker output terminals. Similarly, the (-), Black, Negative or ground terminals must connect to the respective (-), Black, Negative, or ground terminals. This is easy to do by locating the color stripes that appears on the included speaker wire. If longer Speaker AC Adapter Speaker Cable Main Speaker Pairing Spea wire run is needed use 16 gauge weatherproof wire up to 50 feet.

Placing Speakers

If your application requires the speaker to be mounted, please follow these directions. Using the appropriate screws (not included) mount the bracket. Attach the speakers to the brackets using the large plastic knobs supplied.

Mounting

To install the bracket on the speaker. Screw the bracket knobs into the cabinet. Point the speaker toward the listening area. Once the direction of the speaker has been determined tighten the bracket knobs securely. When possible tilt the speakers down to increase longevity and prevent from the weather elements.

Method of Use

Initial Set-Up

• Turn ON iPhone, Android, or Other Bluetooth Device
  
• Open the Blue Tooth Function Search Blue Tooth Device: Bluetooth Open iPhone
• Open the blue tooth function
• Touch device "Bluetooth" for automatic connection Search blue tooth device
• Play Music via Android and or iTunes Speaker Cable Pairing and enter the password iPhone Control Volume via Bluetooth Device and Enjoy. 0000

Sound Appeal
6781 Hopkins Rd. Mentor, OH 44060 (877)302-8397