Download Print this page

imoware USB121-100 User Manual

Usb 2.0 extender (100m)

Advertisement

Quick Links

Imoware USB121-100
USB 2.0 Extender (100M)
VER 1.1
The information contai ned in this document is non-contrac tual and is s ubject to change without notice

Advertisement

loading

Summary of Contents for imoware USB121-100

  • Page 1 Imoware USB121-100 USB 2.0 Extender (100M) VER 1.1 The information contai ned in this document is non-contrac tual and is s ubject to change without notice...
  • Page 2: Table Of Contents

    Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc.
  • Page 3: Introduction

    1. Introduction The USB 2.0 Extender can extend USB signal up to 100m / 328ft via a single Cat5e/6 cable. In the transmitter, the USB-B port is connected to a PC. In the receiver, you can connect a device with USB port (such as U disk or printer or Touch Monitor, etc.) through the two USB ports.
  • Page 4: Specifications

    4. Specifications Technical USB Protocol USB 2.0 Transmission Rate Up to 200Mbps Transmission Distance 100M (328ft) Human-body Model: ESD Protection ±8kV (Air-gap discharge) , ±4kV (Contact discharge) Connection Input port: 1×USB [USB-B, female] Transmitter Output port: 1×CAT [RJ45, female] Input port: 1×CAT [RJ45, female] Receiver Output port: 2×USB [USB-A, female] Mechanical...
  • Page 5: Operation Controls And Functions

    5. Operation Controls and Functions 5.1 Transmitter Panel Number Name Function Description USB port, connect to the USB port of a PC through a USB(TO PC) USB-B male head to USB-A male head wire. Power LED indicator. The green LED will be on when the POWER LED transmitter is powered on.
  • Page 6: Receiver Panel

    5.2 Receiver Panel Number Name Function Description Connect to a device with USB port such as printer or U USB 2.0 port disk, etc.. Power LED indicator. The green LED will be on when the POWER LED transmitter is powered on. Plug 12V/1A DC power supply into the unit and connect DC 12V the adapter to an AC outlet.
  • Page 7: Application Example

    6. Application Example 5 / 5 The information contai ned in this document is non-contrac tual and is s ubject to change without notice...