Table of Contents
Advertisement
Quick Links
Xcelorin 10
LOSB9430 4800Kv ◊
Thank you for purchasing the Losi™ Xcelorin™ sensorless motor. This motor will provide you the
benefit of the latest in brushless technology.
We believe it will be to your benefit to take the time and effort to read these instructions.
We are confident you will be satisfied with the performance of the Xcelorin Sensorless Motor.
Losi/Horizon Support
If you have any questions concerning operation of your Xcelorin Motor, please call Horizon customer
support at 1 877 504 0233.
You are welcome to call us with any support issue or question you may have.
Safety Precautions and Warnings:
•
Please read instructions before operating.
•
Do Not use a Schottky Diode with this motor.
•
Avoid over-gearing by monitoring temperature.
•
Operating temperature should not exceed 165F – 175F (74C – 80C) degrees.
•
Do Not over tighten the motor mounting screws. Damaged threads are not covered under
warranty.
•
Ensure the motor screws do not go into the motor more than 0.180 in (4.5mm).
Specifications:
Sensorless Construction
Rotor Magnet
RPM @ 7.2V
RPM per Volt
Power (W)
Efficiency
Common Specifications:
Precision Ball Bearings
Compatible with both 2S and 3S LiPo batteries, and from 4 to 12 cells
Weight: 6.35 oz (180 g)
Installation and Maintenance:
•
Make certain the 3mm motor screws being used do not extend into the motor more than
0.18 in (4.5mm). Otherwise, you can internally damage the stator windings.
•
With a Sensorless motor you will need to connect the 3 ESC motor leads from the Electronic
Speed Control (ESC), one to each tab.
•
If the motor runs in the opposite direction desired, unplug any two motor wires, reverse the
location and plug back together.
•
Do not over-tighten the motor screws.
•
Brush off dirt and dust frequently from the bearings. Place a drop of oil on each bearing at
the same time.
th
Xcelorin 10
Sensorless Motors v1.0
th
Sensorless Brushless Motor Instructions
LOSB9431 6400Kv ◊
LOSB9430
LOSB9431
Yes
Yes
Sintered
Sintered
34,560
46,080
4800
6400
500
580
90%
88%
LOSB9432 7500Kv ◊
LOSB9432
Yes
Sintered
54,000
7500
630
85%
Advertisement
Table of Contents
Related Manuals for Team Losi Xcelorin 10th LOSB9430 4800Kv
Summary of Contents for Team Losi Xcelorin 10th LOSB9430 4800Kv
- Page 1 Xcelorin 10 Sensorless Brushless Motor Instructions LOSB9430 4800Kv ◊ LOSB9431 6400Kv ◊ LOSB9432 7500Kv ◊ Thank you for purchasing the Losi™ Xcelorin™ sensorless motor. This motor will provide you the benefit of the latest in brushless technology. We believe it will be to your benefit to take the time and effort to read these instructions. We are confident you will be satisfied with the performance of the Xcelorin Sensorless Motor.
- Page 2 Xcelorin 10 Sensorless Brushless Motor Instructions Gearing Suggestions: Xcelorin 6 Cell Motor 10th 10th 10th Buggy Truck Buggy 10th TC 4800 10.7 11.5 11.9 6400 12.6 13.4 13.7 7500 10.6 13.8 14.4 N/R = Not Recommended Xcelorin 10 Sensorless Motors v1.0...
- Page 3 Xcelorin 10 Sensorless Brushless Motor Instructions Warranty Period: Exclusive Warranty- Horizon Hobby, Inc., (Horizon) warranties that the Products purchased (the "Product") will be free from defects in materials and workmanship at the date of purchase by the Purchaser. Limited Warranty (a) This warranty is limited to the original Purchaser ("Purchaser") and is not transferable.
- Page 4 Xcelorin 10 Sensorless Brushless Motor Instructions To receive warranty service, you must include your original sales receipt verifying the proof-of-purchase date. Provided warranty conditions have been met, your Product will be repaired or replaced free of charge. Repair or replacement decisions are at the sole discretion of Horizon Hobby.
Need help?
Do you have a question about the Xcelorin 10th LOSB9430 4800Kv and is the answer not in the manual?
Questions and answers