Table of Contents
Advertisement
1.5 L engine models
2.0 L engine models
5. Connect the other end of the second
jumper cable to the stud bolt as shown. Do
not connect this jumper cable to any other
part.
6. If your vehicle is connected to another
vehicle, start the assisting vehicle's engine
and increase its rpm slightly.
7. Attempt to start your vehicle's engine. If it
turns over slowly, check that the jumper
cables have good metal-to-metal contact.
uuIf the Battery Is DeaduJump Starting Procedure
1If the Battery Is Dead
Battery performance degrades in cold conditions and
may prevent the engine from starting.
Continued
723
Advertisement
Chapters
Table of Contents
