Subscribe to Our Youtube Channel
Summary of Contents for Lumberjack RTS650
- Page 1 SAFETY AND OPERATING MANUAL Bench Top Router Table RTS650 ORIGINAL INSTRUCTIONS RTS650...
-
Page 2: Product Specification
PRODUCT SPECIFICATION Bench Top Router Table Table Size(Length x Width) 650x400mm Table Opening Size 80mm Table Insert Opening Size 6.35 / 12.7 / 35 / 65mm Fence size 620 x 63.5mm (24-1/2″X2-1/2″) Fence Board Offsets 0.8mm (1/32″) / 1.6mm (1/16″) T-Slot Size 19mm (3/4″) Dust port Size... - Page 3 ADDITIONAL SATETY RULES FOR THIS PRODUCT Serious cuts, amputation, entanglement, or death can occur from contact with spinning bits. Improperly secured bits or spindle parts/fasteners can fly off and strike nearby operators or bystanders with great force. Flying dust or debris from cutting operation can cause eye injuries or blindness.
-
Page 4: Carton Contents
CARTON CONTENTS UNPACKING AND CHECKING CONTENTS Carefully unpack the tool and all its parts, and compare against the illustration following. WARNING: If any part is missing or damaged, do not plug the machine in until the missing or damaged part is ... - Page 5 ASSEMBLY ATTACHING THE LEGS TO THE TABLE Place the table upside down on a desk, attach a leg to the table by using four M6X16 socket head screws and four 6mm flat washers. Repeat the step to attach another leg. Attach four feet to the holes on bottom of the legs, secure with four M8 hex nuts and 8mm flat washers.
-
Page 6: Install Router
INSTALL ROUTER Install the mounting plate to your router by using four M6X16 flat head screws or other proper screws. Attach the mounting plate with your router to the table, fix them by using four M5X16 flat head screw. ... - Page 7 INSTALLING THE TABLE INSERT Three sizes of table inserts are provided, please choose according to your needs and install it to the table. If the height of the table insert is not level with the table, it can be adjusted by the adjusting screws.
-
Page 8: Parts List
PARTS LIST... -
Page 9: Exploded View
EXPLODED VIEW...
Need help?
Do you have a question about the RTS650 and is the answer not in the manual?
Questions and answers