Power switching modules solid state relays ( ssr's ) (4 pages)
Summary of Contents for Viconics R810 Series
Page 1
The Viconics R810 series power switching modules are designed for cost-effective, precise modulation of electric loads for most electric heating applications. (Applicable on resistive loads only) The R810 series consists of SSR's (solid-state relays), c/w factory assembled heatsink for surface or in-panel mounting. Models available Part No.
Page 2
Power modules installation Important: All external safety devices like: contactors, relays, flow switch & thermal protections are to be supplied and installed by others. When the modules are installed inside a panel, the enclosure needs to be adequately louvered for proper ventilation and heat dissipation.
Page 3
Typical applications and wiring ------ R810 SSR ( Solid State Relay ) Power Switching Modules For Temperature Control Of Resistive Electric Heaters. Pulsed signal from room thermostat Pulsed signal from BAS controller - 4-32Vdc Pulsed Time Proportionning output - 24Vac Pulsed Time Proportionning output if used with the C24 module Wiring Time Proportioning Signal...
Page 4
For more information, go to www.P65Warnings.ca.gov. Failure to follow these instructions can result in birth defects or other reproductive harm. Viconics Technologies Inc. 7262 Marconi | Montreal | Quebec | Canada | H2R 2Z5 Tel.: 514.313.8885 | Toll free: 1 800.563.5660 sales@viconics.com...