Carson MagniTouch MT-33 Manual

MagniTouch
3x "Touch Activated" LED Lighted Loupe
Congratulations on selecting your new MagniTouch! In order to achieve
optimum performance, please follow instructions for proper use and care.

PRODUCT SPECIFICATION

Magnification: 3x
Weight: 0.47 lbs

INSTRUCTIONS FOR USE

1. For steady light, move switch to middle position (marked ON). For "Touch-Activation," position switch to
"AUTO". While holding loupe base, touch silver ring to activate the light (see Figs. 1-2).
2. Once you have selected your light setting, place loupe on top of subject to be magnified.
3. Focus magnifier by rotating the top portion of the loupe until viewing image is clear and sharp (see Fig. 3).
Fig.1
CAUTION:
Fire Hazard: Keep magnifier away from direct sunlight to prevent accidental fire. Do not stare directly at LED
lights as this might damage your eyes.

REPLACING BATTERIES

1. With Loupe in one hand, pull battery door in direction of arrow (see Fig.4). Then flip battery door up to
expose batteries. (see Fig. 5).
2. Insert two new CR2016 coin cell batteries. Make sure positive side of battery is facing outward.
3. Slide battery door back into place until you hear a click.
Please note: there are two battery compartments. The compartment closest to the light switch is the one that
powers the item. The other battery compartment is used to store extra batteries.
Fig.4

BATTERY WARNING

Batteries: Mixing old and new, different brands or types within brands may cause batteries to leak, overheat or
explode. Keep away from fire or excessive heat. Inspect batteries for corrosion or leakage. Insert in direction
indicated. Discard coin cell batteries carefully. Keep coin cell batteries away from children.
™
Dimensions: 3.8" x 3.8" x 2.2"
Batteries: 2 CR2016
Fig.2
Accessories: Zip Case and Microfiber Cloth
Fig.3
Fig.5
MT-33