Supported Devices; Installation - 70mai UP02 User Manual

Supported Devices

This product is compatible with parking surveillance-supported Xiaomi and Mijia in-car
devices manufactured by 70mai. This product has a micro-USB port and does not
support main devices that uses a Type-C connector.
Important note: For smart rear-view mirrors and other smart in-car products, change
the power on/off mode to "ACC detection mode" in power on/off settings after installing
and connecting the hardware kit. Otherwise, the main device may malfunction.

Installation

Step 1: Connecting the fuse box
Select a suitable car fuse box based on the wiring path and the location of the main
device and connect it to the hardware kit. Please ensure that the fuse box can contain
the followings:
Regular electric fuse with output voltage of 12-30V and output current of 2.4A.
•
ACC power fuse.
•
Step 2: Connecting the hardware kit to the fuse box
Connect the wires of the hardware kit to the fuse box in the following way:
Connect the power cable (red) to the regular electric fuse with an output voltage
•
of 12-30V and output current of 2.4A inside the fuse box.
Connect the ACC signal cable (yellow) to the ACC power fuse inside the fuse box.
•
Connect the ground wire (black) to the negative terminal or ground of the fuse
•
box.
Important notes:
The actual installation and wiring path of the hardware kit may differ from the
•
illustrations in the manual. Please seek assistance from a professional technician.
5