Sony BRAVIA KDL-32S55 Series Operating Instructions Manual page 5

KDL-22S55xx/KDL-22P55xx
Rear of TV
~
• When you carry the TV, place your hand as illustrated
and hold it securely, see page 9. Do not put stress on the
LCD panel and the frame around the screen.
• Be careful not to pinch your hands or the mains lead
when you install the TV to the Table-Top Stand.
3
Use the supplied screws to attach the TV
unit to the Table-Top Stand.
KDL-32S55xx/KDL-32P55xx/KDL-
32P35xx/KDL-26S55xx/KDL-26P55xx
Screws
KDL-22S55xx/KDL-22P55xx
Screws
~
• If an electric screw driver is used, set the torque to
tighten at approximately 1.5 N·m {15 kgf·cm}.
3: Connecting an
aerial/VCR/DVD
recorder
~
• This product has been tested and found to compliant
with the limits set out in the EMC Directive for using
connection cables not longer than 3 meters (9.8 feet).
Connecting an aerial only
Coaxial cable
Connecting an aerial/VCR/DVD recorder with SCART
AV1 AV2
Scart lead
Coaxial cable
VCR/DVD recorder
~
• AV1 outputs available only for analogue TV.
• AV2 outputs to the current screen (except PC, HDMI,
Component 1080i).
Coaxial cable
Continued
5
GB