Sony LBT-XB88KS Operating Instructions Manual page 5

1
Connect the speakers.
1 Connecting the front speakers
Connect the speaker cords to FRONT
SPEAKER jacks of the same color.
Red (')
2 Connecting the center speaker
Connect the speaker cords to the
SURROUND SPEAKER CENTER
jacks.
Gray (')
3 Connecting the rear speakers
Connect the speaker cords to the
SURROUND SPEAKER REAR jacks.
Gray with black stripe (')
Gray (')
Notes
• Keep the speaker cords away from the antennas to
prevent noise.
• Insert only the stripped portion of the cord.
Inserting the vinyl portion will interfere with the
speaker connection and no sound will come from
the speaker.
Black (')
Gray with black stripe (')
2
Connect the FM/AM antennas.
Set up the AM loop antenna, then
connect it.
Extend the FM wire
antenna horizontally.
AM loop antenna
3
Connect the power cord to a wall
outlet.
The demonstration appears in the
display.
If the plug on this unit does not fit your
wall outlet, detach the supplied adapter
from the plug (except for North and
South American countries, Europe and
Australia).
4
Deactivate the demonstration mode
by pressing DISPLAY/DEMO while
the system is off.
To attach the center speaker feet
Attach the four center speaker feet (supplied)
to the bottom corners of the center speaker.
5