Prestel MG-1D User Manual

Routing with the Dante Controller
To assign the input signals and output signals of the corresponding units:
1) Under "Routing" in the window "Network View", click ⊞ to open the channels of the desired unit
under "Dante Transmitters" and the channels of the desired connection partner under "Dante
Receivers"
2) Navigate from the column of the Dante transmit channel to the line of the desired Dante receive
channel and click the field at the intersection point.
3) Wait for the field to show a green circle with a white check mark✔.
Repeat the steps for additional connections.
Product operation
-
An English user guide for the Dante Controller is available
for download on the Audinate
website:
https://www.audinate.com/resources/technical-documentation
User's Manual
Dante networki microphone
MG-1D