Subscribe to Our Youtube Channel
Summary of Contents for Vag EROX plus Penstock
- Page 1 Installation and Operating Instructions VAG EROX plus Penstock ® KAT 2452 - Edition4 - 01-04-2019...
-
Page 2: Table Of Contents
VAG reserves the right to make technical changes and use Table of Contents materials of similar or better quality without prior notice. The pictures used are typical and non-binding. General 1.1 Safety 1.2 Proper use 1.3 Identification Transport and storage 2.1 Transport... -
Page 3: General
Arbitrary alterations of this product and the parts supplied with it • to improve the operational safety and useful life of the equip- are not allowed. VAG does not assume any warranty or liability for ment. consequential damage arising from non-compliance with these instructions. -
Page 4: Storage
DN 150 to DN 1200 in the following versions: traverse Frame Stem Stem nut Gate Retainer Wall seal Picture 3: EROX plus with Picture 2: Standart Version ® Picture 4: EROX plus design ® open frame EROX plus ® VAG Installation and Operating Instructions • 4... -
Page 5: Fields Of Application
Patented sliding wedge system: If a pipe runs into the construction it is essential to ensure that the The VAG sliding wedge system combines the advantages of the sliding system (good guiding properties, vibration-free, valve can Limit values of evenness tolerances in mm according to DIN EN18202... - Page 6 Thus, the wall seal of the slider is optimally biased to the building wall. It is essential to wait for the prescri- bed hardening time of the chemical compound anchors before full load of the VAG EROX plus Penstock.
-
Page 7: Assembly Of The Vag Erox Plus Penstock; Control Distance Measure Of Slide Plate
® ded for attachment to a pipe flange EN 1092-2 PN 10. In sizes DN stock frame. 150 up to and including DN 600, the VAG EROX plus is connec- ® ted to the pipe flange via a flange adapter. -
Page 8: Installation Position
Permissible Not permissible wedges as well as the wall seal must be thoroughly cleaned to re- move all dirt particles. VAG does not assume any liability or war- ranty for consequential damage caused by dirt, shot-blasting gra- vel residue etc. -
Page 9: Actuators
• path-dependent in open position • torque-dependent in closed position. Actuators 6.1 General Directly mounted actuators/drives or VAG extension spindles in many different types are available for the VAG EROX plus Pen- ® stock. Actuators mounted directly to the penstock bridge (pneumatic, hydraulic or electric actuators) are only designed for the operating conditions specified in the order. -
Page 10: Maintenance And Repair
Upon the customer’s request, inspection and maintenance of the The relevant safety regulations of the VDI/VDE and the instruc- penstock can also be performed by VAG’s Technical Service. tions of the manufacturer of the electric actuator must be com- 7.3 Maintenance work and replacement of plied with. -
Page 11: How To Contact Us
Germany Telephone: +49 (621) 749-0 Fax: +49 (621) 749-2153 info@vag-group.com http://www.vag-group.com Service Our service hotline can be reached 24/7 world-wide. In case of emergency, please contact us by phone. Service hotline: +49 621-749 2222 Service per E-Mail: service@vag-group.com info@vag-group.com www.vag-group.com...
Need help?
Do you have a question about the EROX plus Penstock and is the answer not in the manual?
Questions and answers