Qbic Luminen 10 Quick Start Manual

Quick Start Guide
This quick guide will help you go through installa�on quickly
Luminen 10
Touch Panel PC
Contents
Panel PC I/O Cover M3 screw *1
Bracket Tape DC power Adapter
Bracket Kit
(Op�onal)
Indica�on
1 2 3
4 5
6 8
7
MIC Camera Reset hole
1 5 9
Reset Display
2 6 USB 3.0
10
Power Button NFC USB Type C for ADB
3 7 11
Proximity Sensor Side LED RJ45 / PoE+
4 8 12
Installa�on
1. Cable connec�on
STEP 1
M3 M2
Connect cables. Device will
power on when DC/PoE+
is inserted.
M2 screw *2
2. Tape Mount
STEP 1
A�ach tape on the
back of bracket
Metal Stand
(Op�onal)
3. Surface Mount
STEP 1
9 10 11 12 13
Install bracket
on surface
(screws not included)
14
NOTICE:
DC IN
13
◎ This Panel PC is also compa�ble with VESA moun�ng (75mm x 75mm). It is recommended
12 Kensington
14 to secure with M3 screw. The suggested length of the M3 screw is the thickness of
Lock Slot VESA moun�ng bracket plus 8mm(Screw not included).
◎ Please ensure the moun�ng surface is clean and smooth before using the tape.
◎ M2 / M3 screw Torque<2 kgf-cm
◎ Installa�on height: <2M
STEP 2 STEP 3
Install I/O cover Fix 2* M2 screws
STEP 2 STEP 3 STEP 4
Place the bracket on the Fasten M3 screw*1 to Fix the Panel PC
back side of Panel PC secure the bracket and on the surface
back cover using tape
30°
STEP 2 STEP 3
Mount the Panel PC on Fasten M3 screw*1 to
the bracket secure the bracket
and back cover
30°