Table of Contents
Advertisement
WS-431E 4G Router
WIFI
2/3/4G network
indicator
SIG
Power adapter
Input voltage
Power
consumption
Operating
temperature
Storage
temperature
Relative
humidity
Case material
Dimensions
(L × W × H)
Installation
EMC
3. WEB SERVER
When user need to configure the WS-431E, user can connect PC to WS-431E through LAN interface or
WLAN, then open Web Server.
Default parameters of WS-431E as follows:
SSID
IP Address
User name
Password
WLAN Password
Take default parameters as example: User can connect PC to SSID WS-431E-XXXX. Then open browser
and enter 192.168.1.1, log in with User name and Password(both are admin), user can enter
WebServer.
www.waveshare.com
Lights up when WiFi is enabled
2G led lights up after being connected to 2G network
3G led lights up after being connected to 3G network
Both leds light up after being connected to 4G network
2× signal strength indicator: lights up one indicates that the signal is
average; lights up two indicates that the signal is strong
POWER SUPPLY
DC 12V/1A
DC 9-36V
Average 260mA/12V
PHYSICAL CHARACTERISTICS
-20℃~+70℃
-40℃～+125℃（non-condensing)
5%~95%（non-condensing）
Metal case, IP30 protection level
104.0×102.0×28.0mm
DIN rail mounting, wall mounting, tabletop
level 3
WS-431E-XXXX
192.168.1.1
admin
admin
www.waveshare.com
Figure Default parameters
5 / 22
www.waveshare.com/wiki
Advertisement
Table of Contents
