Beko WTE 10734 XS0ST User Manual page 54

Problem
Product does not
switch to spinning
step. (*)
Washing
performance is poor:
Laundry turns gray.
(**)
Washing
performance is poor:
Stains persist or
the laundry is not
whitened. (**)
Washing
performance is poor:
Oily stains appeared
on the laundry. (**)
Washing
performance is
poor: Clothes smell
unpleasantly. (**)
EN / 54
Cause
There is unbalanced load in the
product.
The product will not spin
if water is not drained
completely.
Excessive foam has occurred
and automatic foam
absorption system has been
activated due to too much
detergent usage.
Insufficient amount of
detergent has been used over
a long period of time.
Washing has been made at low
temperatures for a long time.
Insufficient amount of
detergent is used with hard
water.
Excessive amount of
detergent is used.
Insufficient amount of
detergent is used.
Excessive laundry is loaded in.
Wrong programme and
temperature were selected.
Wrong type of detergent is
used.
Excessive amount of
detergent is used.
Regular drum cleaning is not
applied.
Odours and bacteria layers
are formed on the drum as a
result of continuous washing
at lower temperatures and/or
in short programmes.
Solution
• Automatic unbalanced load detection
system is activated due to the
unbalanced distribution of the laundry in
the product.
• Check the filter and the draining hose.
• Use recommended amount of detergent.
• Use the recommended amount of
detergent appropriate for water
hardness and the laundry.
• Select the proper temperature for the
laundry to be washed.
• Using insufficient amount of detergent
with hard water causes the soil to
stick on the cloth and this turns the
cloth into gray in time. It is difficult to
eliminate graying once it happens. Use
the recommended amount of detergent
appropriate for water hardness and the
laundry.
• Use the recommended amount of
detergent appropriate for water
hardness and the laundry.
• Use the recommended amount of
detergent appropriate for water
hardness and the laundry.
• Do not load the product in excess. Load
with amounts recommended in the
"Programme and consumption table".
• Select the proper programme and
temperature for the laundry to be
washed.
• Use original detergent appropriate for
the product.
• Put the detergent in the correct
compartment. Do not mix the bleaching
agent and the detergent with each other.
• Clean the drum regularly.
• Leave the detergent drawer as well
as the loading door of the product ajar
after each washing. Thus, a humid
environment favorable for bacteria
cannot occur in the machine.
Washing Machine / User's Manual