Essentiel EBTWS00 - Wireless Eaphones Manual

TECHNICAL FEATURES

EARPHONES

• Battery: 40mAh Li-polymer battery
• Charging voltage: DC 5V±0.2V
• Charging time: approx. 1.5 hours
• Bluetooth version: V5.0
• Bluetooth profiles supported: HFP, HSP, A2DP, AVRCP
• Audio codecs: SBC, AAC, APTX, CVC
• Transmission power: Class 2
• Power output: ≤ 2.30 mW
• Frequency range: 2402 MHz-2480 MHz
• Operation range: up to 10 meters
• Music playback time: ≥ 4.5 hours
• Talk time: ≥ 5 hours
• Standby time: ≥ 100 hours
• Driver: φ10mm
• Driver sensitivity: 93±3dB (1KHz)
• Driver impedance: 16Ω±15%
• Dimensions (L x W x H): 43.1 x 16.6 x 17.2 mm
• Weight: approx. 3.4 g each

CHARGING CASE

• Battery: 400mAh Li-polymer battery
• Charging voltage: DC 4.5V - 6.0 V
• Charging time: approx. 1.5 hours
• Number of charging earphones: approx. 2-3 times
• Dimensions (L x W x H): 51.5 × 51.5 × 21.1 mm
• Weight: approx. 37.2 g (including earphones)

USING YOUR WIRELESS EARPHONES

CHARGE THE CHARGING CASE

1. Connect the USB-C plug of the supplied USB cable to the USB-C port on the charging case, and the other end (USB-A plug) to the USB port on a computer or a power adapter (not included).
   • During charging, the battery indicator on the charging case flashes red. When fully charged, the battery indicator on the charging case turns off (if the charging case does not charge the earphones).
     

BATTERY LEVEL INDICATIONS OF CHARGING CASE

When the charging case is charging the earphones, the battery indicator on the charging case flashes in different frequencies every 2 seconds to indicate battery levels of the charging case, as described below.

Flashes 4 times for 75-100%; flashes 3 times for 50-75%; flashes twice for 25-50%; flashes once for 0-25%.

CHARGE THE EARPHONES

When the battery of an earphone is lower than 10%, the earphone emits a voice prompt "Low battery, please charge." every 60 seconds.

1. Place the earphones back to the corresponding positions in the charging base. The earphones will be charged automatically.
   • During charging, the status indicator on the earphone will light up white. When fully charged, the status indicator on the earphone turns off.
     

TURN ON/OFF

You can turn the earphones on or off through either of the following ways.

• Take the earphone out of the charging case, and the earphone turns on automatically. Place the earphone back to the charging case, and the earphone turns off automatically.
• Tap and hold the touchpad on either earphone for 2 seconds to turn the corresponding earphone on. Tap and hold the touchpad on the earphone for 5 seconds to turn the earphone off.
  

PAIR WITH A MOBILE PHONE

Pair the earphones with your mobile phone, so that audio from the mobile phone can be wirelessly streamed to the earphones.

1. Turn on both earphones. The earphones will automatically pair with each other.
   When successfully paired, the status indicator on the right earphone (master earphone) flashes white slowly and the status indicator on the left earphone (slave earphone) flashes white once every 5 seconds. The right earphone also emits a voice prompt "Pairing successful".
2. On your mobile phone, activate Bluetooth, search for Bluetooth devices and select the earphone name from the Bluetooth list. The earphones will be paired with the mobile phone.
   When successfully paired, the right earphone (master earphone) emits a voice prompt "Connected".

After the earphones and your moible phone are successfully paired, the two will be automatically connected each time they are powered on.

HANDS-FREE PHONE CALLS

When the earphones are connected with your mobile phone, you can use the earphones to control phone calls.

• When a phone call is received, tap the touchpad on either earphone to answer the call.
• To end or reject a call, tap and hold the touchpad for 2 seconds on either earphone.
• To reject a call, double-tap the touchpad on either earphone.

MUSIC PLAYBACK CONTROL

When the earphones are connected with your mobile phone, you can use the earphones to control music playback.

• Tap the touchpad on either earphone to start music playback. Tap twice the touchpad on the right earphone to pause music playback.
• During music playback, tap and hold the touchpad on the right earphone for 2 seconds to select a next music file; tap and hold the touchpad on the left earphone for 2 seconds to select a previous music file.
• To activate your smartphone's voice assistant, hold the touchpad of one of the two earphones for 2 seconds then ask your question clearly aloud.

Read these instructions carefully before using the device and keep them in a safe place for future reference.

• Do not use this appliance for any purpose other than those described in this document.
• To prevent any risk of fire or electric shock, never expose your earbuds to high temperatures, excessively high humidity or direct sunlight.
• Never put heavy objects on top of your earbuds.
• Do not insert other objects into the earbuds, as this may cause electrical incidents.
• Do not throw or hit your earbuds.
• Only allow young children to use the earbuds unattended if proper instructions have been given so that they can use it safely, as improper use can lead to injury.
• This product is not suitable for children under 36 months of age. Strangulation hazard.
• The earbuds must not be immersed in water, splashed or placed near containers filled with liquid, such as vases. Keep the earbud sin a dry location after use.
• Never attempt to disassemble or reassemble the earbuds yourself. Repairs must be carried out by qualified personnel.
• To protect your health and hearing ability, do not listen to music at a high volume for long periods of time. It is advisable to regularly stop using your earbuds and/or keep the output volume at a reasonable level.
• Do not set the volume to a level preventing you from hearing what is happening around you.
• Only clean the appliance using a soft, dry cloth and avoid using aerosols.

In order to avoid possible hearing damage, do not listen at high volume level for long periods of time.

This product complies with the order of 8 November 2005 implementing article L.5232-1 of the French public health code.

Recycling the battery

This device contains an internal lithium battery likely to explode or release hazardous chemicals.

To reduce the risk of fire or burn, never dismantle, crush, puncture the battery.

Do not dispose of the cells and batteries with household waste.

To protect the environment, the cells and batteries must be disposed of in accordance with current regulations.