- Turntable
- Tonearm
- Tonearm lifter
- Tonearm rest
- Tonearm lock
| - Place the vinyl record onto the turntable.
- Remove the stylus cover by gently sliding the cover away from the tonearm.
- Push the tonearm lock aside to unlock the tonearm.
- Use the tonearm lifter to lift the tonearm or manually lift the tonearm.
- Place the tonearm onto the outer edge of the vinyl record. The turntable starts to rotate and play the vinyl record automatically.
- The turntable stops when the tonearm reaches the end (inner edge) of the vinyl record.
- Lift the tonearm. Place the tonearm into the tonearm rest.
- Engage the tonearm lock to lock the tonearm.
- Remove the vinyl record from the turntable.
Note: Before transport, make sure that the tonearm is locked. |
- 45 rpm adapter
| - Use the 45 rpm adapter to listen to the 45 rpm vinyl records.
|
- Automatic switch-off
| - Set the switch to the "ON" position to enable the automatic switch-off function.
- Set the switch to the "OFF" position to disable the automatic switch-off function.
|
- Speed selector
| - Use the speed selector to select the speed (33/45/78 rpm).
|
- Mode button
| - Press the button to set the mode: Bluetooth / AUX / turntable.
|
- LED indicator
| - The indicator lights blue in Bluetooth mode.
- The indicator lights red in AUX mode or turntable mode.
- The indicator lights green when the device is being charged.
|
- 11. On/off dial
Volume dial | On/off dial - Turn the dial clockwise to the "ON" position to switch on the device.
- Turn the dial counterclockwise to the "OFF" position to switch off the device.
Volume dial - Turn the dial clockwise to increase the volume.
- Turn the dial counterclockwise to decrease the volume.
|
- Headphone jack
| - Connect the headphones to the headphone jack.
Do not use headphones at high volume levels to prevent hearing damage. |
- RCA output (red/white)
| - To use an external amplifier, connect the RCA cable to the RCA output of the device and to the external amplifier. Make sure that each plug of the RCA cable is connected according to the corresponding colour (red/white).
|
- AUX input
| - To play audio files from an audio device, connect an AUX cable to the AUX input of the device and to the audio device.
- Use the controls on the audio device to control the sound.
|
- DC input (5V/1.0A)
| Fully charge the battery before first use. The charging duration is 3-5 hours. - To charge the device, connect the USB cable to the DC input of the device and to the USB port of the USB charger (5V/1.0A).
- The LED indicator lights green when the device is being charged. The LED indicator goes off when the device is fully charged.
- If the device is fully charged, disconnect the USB cable from the DC input of the device and the USB port of the USB charger.
Note: The device can be operated during the charging process, but it may take longer to fully charge the device. |
- Dust cover
| - If you play vinyl records, open the dust cover.
- If you do not play vinyl records, close the dust cover.
|
| - The speaker is located on the bottom of the device.
|
Need Assistance?
Do you have a question about the TURN200BN that isn't answered in the manual? Leave your question here.