NEC V321-2 Installation Manual

V321 Installation Guide
32" LCD Display
Contents:
Product Description and Notes
Tilt Angle and Rotation
Ventilation Requirements
Display Dimensions
Front, Top & Right Side
Rear & Bottom
Display Dimensions w/Optional Speakers and Stand
Table Top Stand Dimensions
Optional Speaker Dimensions
Optional Wall Mount Dimensions (WMK3260)
Optional Wall Mount Dimensions (WMK3257)
Input Panel
Control Codes

Product Description

Type:
Resolution:
Aspect Ratio:
FCC:
Power Consumption:
BTU's:
NOTES:
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
•
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
•
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
•
to fill the screen using the menus (see "Aspect Modes" in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
•
Distances may vary ±5%.
•
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in the landscape position only.
Landscape 20deg
Max. 20 deg
www.necdisplay.com
LCD Display
1366 x 768
16:9
Class B
120W (max)
409.46 BTU/hour
NEC Display Solutions of America, Inc.
Page 1
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Screen Surface:
Dimensions without stand: 31.1"(W) x 18.8"(H) x 5.2"(D)
Dimensions with stand:
Weight without stand:
Weight with stand:
V321
Rev 1.1
Anti-Reflective
31.1"(w) X 21.2"(h) X 9.7"(D)
31.5 lbs
34.4 lbs
Page 1 of 11