Advertisement
ADJUSTING THE SHELVES
THIS REFRIGERATOR IS FITTED WITH ADJUSTABLE
SHELVES WHICH CAN BE MOVED TO SUIT
DIFFERENT SIZE PRODUCTS.
SHELVES REMOVE THE SHELF COMPLETELY FROM
THE UNIT TO REVEAL THE SHELF CLIPS. LIGHTLY
SQUEEZE THE CLIPS TOGETHER BY HAND AND
LIFT THEM UPWARDS TO REMOVE THEM FROM
THE SUPPORT LADDER.
IMPORTANT: DO NOT USE PLIERS OR TOOLS
TO SQUEEZE THE SHELF CLIPS TOGETHER AS
THIS WILL DEFORM THEM AND THEY WILL NO
LONGER SUPPORT THE WEIGHT OF THE SHELF.
TO REINSTALL THE CLIPS INTO THE CORRECT
LOCATION PLACE THE BOTTOM LUG OF THE CLIP
INTO THE SUPPORT LADDER, SQUEEZE TOGETHER
BY HAND AND INSERT THE TOP LUG INTO THE
LADDER SUPPORT.
DEFROSTING
THIS
REFRIGERATOR
AUTOMATIC DEFROST SYSTEM.
DEFROSTING IS NOT REQUIRED UNDER NORMAL
CIRCUMSTANCES.
IN HUMID CONDITIONS MOISTURE IN THE AIR
MAY CAUSE AN EXCESS BUILD UP ON FROST ON
THE INSIDE OF THE UNIT.
MANUAL THERMOSTAT MODELS: UNLOAD THE
CABINET AND TURN OFF UNTIL ALL FROST AND
ICE BUILD UP HAS NATURALLY MELTED. A TOWEL
MAY NEED TO BE PLACED UNDER THE CABINET
TO SOAK UP ANY EXCESS MOISTURE GENERATED
DURING DEFROST. IF FROST BUILD UP REOCCURS
AND THE CABINET IS WITHIN ITS NORMAL AMBIENT
OPERATING TEMPERATURE THE THERMOSTAT MAY
BE SET TOO HIGH, REDUCE THE NUMBER THAT THE
THERMOSTAT IS SET TO.
WARNING
NEVER REMOVE FROST OR ICE BUILD UP WITH
A SHARP IMPLEMENT OR TOOL AS THIS WILL
DAMAGE THE REFRIGERATION SYSTEM AND
WILL VOID YOUR WARRANTY
XDMANUAL.indd 7
TO ADJUST THE
IS
FITTED WITH
AN
MANUALLY
WARNING
NEVER TOUCH THE EVAPORATOR SURFACE
WHEN THE MACHINE IS RUNNING AS THIS MAY
CAUSE INJURY TO THE USER
LOADING YOUR CABINET
ALLOW YOUR CABINET TO RUN FOR 2 HOURS
AFTER
INSTALLATION
PRODUCTS INTO THE REFRIGERATOR.
ALWAYS LOAD YOUR REFRIGERATOR IN BATCHES,
FULLY LOADING YOUR CABINET WITH WARM
PRODUCT
WILL
INCREASE
TEMPERATURE AND MAY CAUSE LOSS OF
PRODUCT.
WHEN LOADING YOUR REFRIGERATOR ALWAYS
ALLOW ADEQUATE SPACE FOR FLOW OF AIR INSIDE
THE CABINET. NEVER LOAD PRODUCTS TOUCHING
THE INTERIOR WALLS OF THE UNIT. NEVER LOAD
PRODUCTS SO THAT THEY ARE OVERHANGING
THE SHELVES. THE SPACE BETWEEN THE FRONT
OF THE SHELF AND THE DOOR IS DESIGNED TO
ASSIST AIR FLOW, NEVER BLOCK THIS SPACE.
ALWAYS LOAD YOUR REFRIGERATOR WITH CARE,
NEVER THROW OR DROP ITEMS ON TO THE
SHELVES AS THIS COULD CAUSE DAMAGE TO THE
INSIDE OF THE CABINET OR DISLOCATE THE SHELF
CAUSING DAMAGE OR INJURY.
OPERATING THE INTERIOR AND CANOPY LIGHTS
THE INTERIOR AND CANOPY LIGHTING (WHERE
FITTED) CAN BE SWITCHED OFF AT NIGHT OR
WHEN THE CABINET IS NOT IN USE TO SAVE
ELECTRICITY AND REDUCE RUNNING COSTS.
OPERATING THE LIGHTS (ALL CABINETS)
YOUR
REFRIGERATOR
AN EXTERNAL LIGHT SWITCH.
LIGHTING ON AND OFF SIMPLY PRESS THIS SWITCH
WHEN REQUIRED.
5
PART III
BEFORE
LOADING
THE
CABINET
IS
FITTED
WITH
TO TURN THE
XD080818UM Rev 1.4
16/07/2021 11:19:52
Advertisement
