Table of Contents
Advertisement
PEX16_1: PCI-Express Gen2 x16 Slot
PCI-Express 2.0 compliant.
-
-
Maximum theoretical realized bandwidth of 8GB/s simultaneously per
direction, for an aggregate of 16GB/s totally.
-
PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins.
PEX1_1/PEX1_2: PCI-Express Gen2 x1 Slots
-
PCI-Express 2.0 compliant.
-
Data transfer bandwidth up to 500MB/s per direction; 1GB/s in total
PCI1/PCI2/PCI3: Peripheral Component Interconnect Slots
This motherboard is equipped with 3 standard PCI slots. PCI stands for Peripheral
Component Interconnect, and it is a bus standard for expansion cards.
Install an Expansion Card
You can install your expansion card by following steps:
1.
Read the related expansion card's instruction document before install the
expansion card into the computer.
2.
Remove your computer's chassis cover, screws and slot bracket from the
computer.
3.
Place a card in the expansion slot and press down on the card until it is
completely seated in the slot.
4.
Secure the card's metal bracket to the chassis back panel with a screw.
5.
Replace your computer's chassis cover.
6.
Power on the computer, if necessary, change BIOS settings for the
expansion card.
7.
Install related driver for the expansion card.
TA960
13
Advertisement
Table of Contents
