Set Up An Nfc Connection (For Selected Models); Use A Smart Card Or Microsd Card (For Selected Models) - Lenovo 20X300N8IX User Manual

2. Right-click the Bluetooth icon.
3. Select Go To Settings ➙ Add Bluetooth or other device ➙ Bluetooth.
4. Select a Bluetooth device, and then follow the on-screen instructions.

Set up an NFC connection (for selected models)

If your computer supports NFC, you will see an NFC mark or label
To turn on NFC:
1. Open the Start menu and click Settings ➙ Network & Internet ➙ Airplane mode.
2. Ensure that the Airplane mode is off and turn on the NFC function.
By using NFC, you can simply tap and connect your computer and another NFC-enabled device over a few
centimeters or inches. To locate NFC areas on your computer, see "Front view" on page 1.
Note: Ensure that the NFC card is in NFC Data Exchange Format (NDEF), otherwise the card cannot be
detected.

Use a smart card or microSD card (for selected models)

If your computer has a smart-card slot or microSD card slot, read the following information.
Supported smart card
Supported smart card specifications: 85.60 mm (3.37 inches) x 53.98 mm (2.13 inches)
Attention: Smart cards with slits are not supported. Do not insert such a smart card into the smart-card slot
of your computer. Otherwise, the reader might get damaged.
Install or remove a card
Attention: Before removing the card:
1. Click the triangular icon in the Windows notification area to show hidden icons.
2. Select the corresponding item and right-click the Safely Remove Hardware and Eject Media icon.
around the trackpad area.
.
Chapter 3 Explore your computer
25