Gigabyte E263-Z30-AAV1 User Manual page 97

5-3-3-2-1 DDR Power Options
Parameter
DDR Power Options
Power Down Enable
Sub Urgent Refresh Lower
Bound
Urgent Refresh Limit
DRAM Refresh Rate
Self-Refresh Exit Staggering
Description
Enable or disable DDR power down mode.
Options available: Disabled, Enabled, Auto. Default setting is Auto.
Specifies the stored refresh limit required to enter sub-urgent refresh mode.
Specifies the stored refresh limit required to enter urgent refresh mode.
DRAM refresh rate: 1.95us or 3.9us.
Options available: 3.9 usec, 1.95usec. Default setting is 3.9 usec.
Options available: Disabled, n=1~9. Default setting is n=9.
BIOS Setup
- 97 -