Related Manuals for Stryker Pello
Summary of Contents for Stryker Pello
- Page 1 Pello Microdebrider 6290-100-000 Instructions For Use ENGLISH (EN) 2023-04 700000890732 Rev-AE www.stryker.com...
-
Page 2: Contact Information
Authority of the European Member State where the user and/or patient is established. Indications for Use The Stryker Pello Microdebrider system is an electrically operated surgical instrument powered by the Stryker Consolidated Operating Room Equipment (CORE™ The electric motor provides power to operate removable rotating... -
Page 3: Safety Directives
Contraindications None known. Description When used with a variety of accessories, the Stryker Pello Microdebrider handpiece is used to cut and remove soft and osseous tissue/bone. The handpiece features a quick locking mechanism for accessory insertion. The handpiece is designed to provide irrigation and suction to the accessory tip. - Page 4 • All accessories are intended for single use only. Reuse significantly increases wear on the handpiece and accessories. NOTES: • Sterile accessories are sterilized by ethylene oxide (EtO). • For a complete list of accessories, contact your Stryker sales www.stryker.com...
- Page 5 700000890732 Rev-AE representative or call Stryker customer service. Outside the US, contact your nearest Stryker subsidiary. • Depth markings on the accessories are intended as approximate reference only. CAUTION: • The ENT brush stylet is used to clear obstructions from the inner lumen of the accessory.
- Page 6 700000890732 Rev-AE Shaver Pello angled 40 degree 4 mm 6290-112-040-40 Blades shaver blade (multipack) (To be used Pello Angled 40 degree 4 mm 6290-112-140-40 in oscillating shaver blade (single) mode Pello angled 60 degree 4 mm 6290-112-040-60 (OSC) shaver blade (multipack)
- Page 7 Suction Port – Connect the suction tubing to this port. Tube Retainer – Connect the irrigation and suction tubing to this retainer. Electrical Cable – Connect the electrical cable to the console. Hub Flange – Flush with handpiece when cutting accessory is fully inserted. www.stryker.com...
- Page 8 Advance the accessory until it snaps into place with an audible click. NOTE: DO NOT depress accessory release button during insertion. 2. To confirm the accessory is fully engaged, ensure the hub flange is flush with the handpiece. Click! www.stryker.com...
- Page 9 To Connect the Irrigation and Suction Tubes 1. Attach the smaller diameter irrigation tube to the irrigation spike port. 2. Attach a suction tube to the suction port. 3. Snap the irrigation and suction tubes into the tube retainers located on the handpiece’s electrical cable. www.stryker.com...
- Page 10 5. Plug the console into an electrical wall outlet and turn the console ON. 6. Review and acknowledge the console’s initial warning screen concerning the attachment limitations. 7. Using the console touch screen, set the desired handpiece speed, mode and irrigation setting. www.stryker.com...
-
Page 11: Clearing Obstructions
8. Using the footswitch, activate the handpiece. Depending on user preference, the footswitch pedal may be assigned different functions using the console. WARNING: DO NOT resect tissue with the Pello Microdebrider system while actively tracking with navigation systems. The endoscopic monitor shall be used while dissecting. -
Page 12: Troubleshooting
• ALWAYS follow local, state and federal regulations regarding the disposal of sharps. Troubleshooting WARNING: DO NOT disassemble or service this equipment unless otherwise specified. NOTE: For service, contact your Stryker sales representative or call Stryker customer service. Outside the US, contact your nearest Stryker subsidiary. PROBLEM CAUSE... -
Page 13: Processing Instructions
Relocate electrical equipment; increase spatial distance. Plug equipment into different outlets. Processing Instructions For cleaning, sterilization, and disposal/recycle information of the Stryker Pello Microdebrider handpiece, see the processing instructions manual supplied with the product. www.stryker.com... -
Page 14: Specifications
Mode of Operation: Duty Cycle: 3 minutes on/3 minutes off, 10 times Rest Between Cycles: 3 hours Power Supply: Stryker CORE 2 Console 40 V Equipment Type: Type BF applied part Applied Part: The distal end of the handpiece as defined by the manufacturer. - Page 15 700000890732 Rev-AE www.stryker.com...
- Page 16 (269) 323-7700 (800) 253-3210 Stryker European Operations Limited Anngrove, IDA Business & Technology Park Carrigtwohill, Co Cork T45 HX08 Ireland Stryker EMEA Supply Chain Services B. V. Frans Maasweg 2 Venlo 5928 SB, The Netherlands UK Responsible Person Stryker UK Ltd.