Page 1
Under Surface Long Distance 10W Wireless CHARGhub Please read these instructions carefully before use www.chargitstore.com hello@chargitstore.com 0333 700 8889...
CHARGit Wireless Charger The IC30 Invisible Wireless Charger is compatible with all Qi/ MagSafe devices Charging distance can reach up to a maximum of 30mm*. Through wood, glass, acrylic, marble, granite and all other non-metallic surfaces. WARNING: Please do not use through metal surfaces.
Installation steps Select on your chosen surface where you would like to position your invisible charger. We suggest that you test that a compatible phone can charge through the surface before proceeding. Please do not place device directly onto unit, always keep a minimum distance of 15mm.
Page 5
For surfaces thicker than 30mm* For surfaces more than 30mm* thick we advise to route an area of 120 x 160mm. * Whilst we state that the maximum distance is 30mm, please note that this can be exceeded when a device has a protective case on it.
Power indicator lights Power On Green Light Charging Pulsing Green Light Abnormal (FOD) Flashing Warnings Install the charger according to the instructions. Do not install the charger under any metal object. Do not place any metal objects or magnetic fields such as credit debit cards etc onto the charging area.
Trouble shooting If your device is not charging Please ensure your device is compatible with Qi/MagSafe wireless charging. Make sure your device is correctly aligned on the charging area. Remove your case from your phone. Ensure the charger is connected to power and switched on.
Product specification Model No. CISIC30 Input 24V/1A Wireless Output Max 10W Charging Distance 15-30mm Charging Area 20mm Working Frequency 125-135kHz Dimensions 107 x 107 x 23mm Protection OTP, OVP, OCP Material ABS+PC Weight 186g...
The images in this manual are for illustration purposes only, the actual product may vary. • In accordance with the FCC rules, this equipment has been tested and found to comply with the limits for a Class B digital devices. This equipment may cause interference to other equipment if not installed and used in accordance with these instructions.