Download Print this page

Nitro MY2 Instruction Manual page 6

Advertisement

Start the Engine
Before using the starter, make sure the batteries in your R/C car and transmitter are fully
charged. Check the radio functions to make sure your R/C car is in proper working order.
STEP
STEP
1
ON
Turn on Radio System
1.Switch on transmitter.
2.Switch on receiver.
Flooded Engine
Turn the wrench counter-clockwise
to remove the glow plug.
Glow Plug
Use a fully charged glow plug igniter to test the glow plug.
Hold the glow plug with needle nose pliers and attach to the
igniter. If the plug is good, the element will glow an orange
or red color. If the element doesn't glow,or if it is damaged,
you will need to replace the plug. The element will be very
HOT!
hot when glowing.
Glow Plug lgniter
2
Tilt the engine head away from face
and turn the motor over using the
starter.
Good Plug
Element glows when tested.
Pliers
Fill tank with high quality
R/C car glow fuel.
Element
Bad Plug
Element may be damaged
or broken if it doesn't
light up completely.
Keep the wheels off the ground
during static break-in!
Replace the glow plug and
complete the starting steps
without priming the engine.
Bad Plug
Element is broken or
doesn't light up at all.

Advertisement

loading