Advertisement
CONTENTS
QUICK REFERENCE GUIDE
PROGRAMME CHART
PREPARING THE LAUNDRY
SELECTING A PROGRAMME AND OPTIONS
STARTING AND COMPLETING A PROGRAMME
CHANGING A PROGRAMME
INTERRUPTING A PROGRAMME
DAILY MAINTENANCE AND CLEANING
INSTRUCTIONS FOR USE
BOOKLET
BEFORE USING THE DRYER / CONNECTIONS
ELECTRICAL CONNECTION
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
DESCRIPTION OF THE DRYER
VENT CONNECTION
DOOR REVERSIBILITY
TROUBLESHOOTING GUIDE / AFTER-SALES SERVICE
10
PAGE
11
PAGE
12
PAGE
13
PAGE
14
PAGE
15
PAGE
16
PAGE
9
Advertisement
Table of Contents
Related Manuals for Whirlpool AWZ 3303
Summary of Contents for Whirlpool AWZ 3303
- Page 1 CONTENTS QUICK REFERENCE GUIDE PROGRAMME CHART PREPARING THE LAUNDRY SELECTING A PROGRAMME AND OPTIONS STARTING AND COMPLETING A PROGRAMME CHANGING A PROGRAMME INTERRUPTING A PROGRAMME DAILY MAINTENANCE AND CLEANING INSTRUCTIONS FOR USE BOOKLET BEFORE USING THE DRYER / CONNECTIONS ELECTRICAL CONNECTION PRECAUTIONS AND GENERAL RECOMMENDATIONS DESCRIPTION OF THE DRYER...
-
Page 2: Before Using The Dryer / Connections
BEFORE USING THE DRYER / CONNECTIONS 1. Removing the packaging and check • After unpacking, make sure that the dryer is undamaged. If in doubt, do not use the dryer. Contact After-Sales Service or your local retailer. • Keep the packaging materials (plastic bags, polystyrene parts, etc.) out of reach of children, as they are potentially dangerous. -
Page 3: Electrical Connection
3) Socket outlet / plug (valid for both countries) If the fitted plug is not suitable for your socket outlet, please contact Whirlpool Service for further instruction. Please do not attempt to change plug yourself. This procedure needs to be carried out by a qualified Whirlpool technician in compliance with the manufactures instructions and current standard safety regulations. -
Page 4: Precautions And General Recommendations
PRECAUTIONS AND GENERAL RECOMMENDATIONS 1. Packing The packing box may be fully recycled as confirmed by the recycling symbol. 2. Energy saving tips • Always dry a full load: depending on the type of laundry and the programme/drying time. • By preference use the maximum spin speed allowed by your washing machine, since draining the water mechanically requires less energy. -
Page 5: Description Of The Dryer
DESCRIPTION OF THE DRYER A. Work top B. Contact pin C. Door To open the door: pull the handle To close the door: push gently until closed. D. Filter Reminder - Maintenance and Cleaning Clean the lint filter at the end of every drying cycle: Open the door. -
Page 6: Vent Connection
VENT CONNECTION Normally the hose and adaptor are not supplied; the accessory AMH 577 kit, available at your dealer or our After Sales Service, should be used. Installing the vent hose A. Place a towel or the packing material on the right-hand side next to the dryer. -
Page 7: Door Reversibility
DOOR REVERSIBILITY Door Reversibility A. Unplug the dryer. B. Open the door. C. Using a spanner, turn the contact pin on the inside of the door (top) through 90° and remove it. D. Remove the 2 door hinge screws, followed by the door. E. -
Page 8: Troubleshooting Guide / After-Sales Service
TROUBLESHOOTING GUIDE / AFTER-SALES SERVICE Troubleshooting Guide If a fault occurs, before contacting our After- Sales Service, make the following checks to try and remedy the problem: Drying takes too long / laundry is not dry enough: • Was the correct programme selected? •...
Need help?
Do you have a question about the AWZ 3303 and is the answer not in the manual?
Questions and answers
Drier seems to have a water leak
The Whirlpool AWZ 3303 dryer may leak water due to the following potential reasons:
1. Lint Filter Blockage: If the lint filter is dirty or clogged (indicated by the lint filter indicator lamp), it can restrict airflow and cause moisture buildup, leading to water leaks. Clean the filter after every cycle.
2. Excessively Wet Laundry: If the laundry inserted is too wet (e.g., washing machine spin speed is less than 800 rpm), the dryer may struggle to handle the excess moisture, causing leaks. Ensure the laundry is properly spun before drying.
3. Improper Installation or Ventilation: Ensure the dryer is correctly installed and that the air vent is not blocked or improperly connected, as this can cause condensation and water leakage.
4. Room Temperature or Humidity: The dryer is designed to operate in a room temperature range of 5°C to 35°C with relative humidity. If the surrounding environment exceeds these limits, condensation may occur, leading to leaks.
Check these factors to identify and resolve the issue.
This answer is automatically generated