Troubleshooting - Monster Power POWERBAR 1100 Owner's Manual

Symptom
The PowerBar is
®
not receiving power.
16

TROUBLESHOOTING

Possible Cause Remedy
The PowerBar • Turn the PowerBar switch on.
is not turned on.
• Make sure the PowerBar's AC power plug is plugged
into a properly grounded 120V wall outlet.
• In some households, a wall switch may need
to be thrown to make the wall plug come alive.
Try turning on the light switches located near
the wall unit powering the PowerBar.
Too many devices are connected, • Press the PowerBar Thermal Circuit Breaker button
causing an overload, throwing (labeled as RESET below the power cord) in to reset.
the Thermal Circuit Breaker. Please allow 10 minutes from the time the circuit breaker
Please note: The total power is thrown before attempting to reset. If you reset too
consumption on all the soon, the breaker will prematurely sense power overload
components powered by the and not allow unit to operate.
PowerBar should not exceed
1800 watts.