Related Manuals for BELIMED WD 150/425
Summary of Contents for BELIMED WD 150/425
- Page 1 Operating Instructions Instrument rack WD 150/425 Item number: 643001-0330-EN Version: 001-03/16...
-
Page 2: Table Of Contents
Poor cleaning result ........7 Organisation Belimed AG....... . . 8 Manufacturer . -
Page 3: Introduction
Indicates a hazard with medium risk which, if not avoided, can cause death or serious injury. Caution Indicates a hazard with low risk which, if not avoided, can cause minor or moderate injury. Note Operating tips and useful information on the best possible utilization. Operating Instructions Wagen © Belimed 643001... -
Page 4: For Your Safety
Only suitable for devices WD 150 and WD 425 for cleaning: • Instruments, using DIN trays (4-tier up to a maximum of 8 DIN trays) Instrument rack fully loaded Note The instrument racks can be 1-, 2-, 3- or 4-tier. Fig 1045 Standard trays Operating Instructions Wagen 643001 © Belimed... -
Page 5: Loading
Note Magnets for programme selection (see Fig. 1040) are enclosed with the racks. The magnet combination must be configured manually depending on the load. Operating Instructions Wagen © Belimed 643001... -
Page 6: Daily Maintenance And Cleaning Work
Undo attachment screw (Fig. 1040, pos. 3) on wash arm Note Take care not to lose the spacer disk (pos. 2)! Slightly lift the wash arm (Pos. 1) and remove sideways Fig 1040 Wash arm Spacer disk Attachment screw Magnet for programming Operating Instructions Wagen 643001 © Belimed... -
Page 7: Poor Cleaning Result
(see Chap. 4 "Daily maintenance and cleaning work") • Has the rack been inserted properly? • (see device Operating Instructions) • Have the items to be washed been pre-treated correctly? • (see device Operating Instructions) Operating Instructions Wagen © Belimed 643001... -
Page 8: Organisation Belimed Ag
Organisation Belimed AG Organisation Belimed AG Manufacturer Belimed AG Grienbachstrasse 11 6300 Zug, Switzerland +41 41 449 78 88 +41 41 449 78 89 info@belimed.com | www.belimed.com Wagen 643001 © Belimed... - Page 10 Belimed AG | Grienbachstrasse 11 | 6300 Zug | Switzerland | +41 41 449 78 88 | +41 41 449 78 89...
Need help?
Do you have a question about the WD 150/425 and is the answer not in the manual?
Questions and answers