Wireless Bridge - Sony BRAVIA KDL-40W5100 Reference Book

Getting Started Operating the TV
Getting Started > Network Setup
Network Setup
(Page 3 of 5)

Wireless Bridge

This TV includes an automatic setup for the following model of CISCO Wireless Bridge: WET610N.
Requirements: Ethernet LAN cable, Wireless Router, CISCO Wireless Bridge model WET610N.
There are two types of setup for the Wireless Bridge.
Click on the link below corresponding to your scenario.
Scenario 1: Wi-Fi Protected Setup
(WPS)
Scenario 2: Scan for SSID
For more details on manual setup instructions and advanced setup configurations, refer to the instruction manual of the CISCO Wireless Bridge.
We recommend using a Wireless Router and Wireless Bridge with support of Wireless N for streaming video support.
It is normal for the TV to take up to several minutes to recognize the Wireless Bridge device when it is first plugged in.
Back to Network Setup (Page 2 of 5)
Home | Getting Started | Operating the TV | Exploring Fun Features | TV Home Menu | Other Information | Specifications
Exploring Fun Features
Click a link to the left for more information.
Tell us your opinion about this online reference book.
Copyright © 2009 Sony Electronics Inc. All rights reserved.
TV Home Menu Other Information
Next to Network Setup (Page 4 of 5)
Specifications