Download Print this page

Astro Pneumatic Tool DS2000 Manual

Pneumatic door skin remover tool

Advertisement

Quick Links

Model:
DS2000
Foreseen Use of the Tool
Do not use the tool outside of the design intent.
Never modify the tool for any other purpose, or for its use.
Safety Precaution
Caution: To help prevent personal injury
Use of this product can expose you to chemicals
such as phthalates which are known to the State
of California to cause cancer, and birth defects or
other reproductive harm. For more information go
to www.P65Warnings.ca.gov/product. Always wear
ANSI approved safety equipment, safety glasses
and clothing when using this product. Study,
understand, and follow all instructions provided
with this product. Failure to read and follow all
warnings and operating instructions may
result in damages and serious injury or death.
Always wear ANSI approved goggles when using
this product.
Always select the correct accessories of the
correct size and design for the job that you are
attempting to perform.
Always work in a clean, safe, well-lit, organized
and adequately equipped area.
Do not begin repairs without assurance that
vehicle is in secure position, and will not move
during repair.
Product Information:
• Save significant time and cost in the removal
of damaged door skins
• Forged and hardened steel de-crimping head
• Designed to unfold the steel flanges of a damaged
door skin with a minimum of physical effort
• De-crimping head can be repositioned at various
angles based on operator preference
• Secondary handle can be installed in either vertical
or horizontal position and adds stability to
help keep the tool oriented
• Patent Pending
Unpacking
When unpacking, check the parts diagram and part number listing
on page 5 to make sure all parts are included. If any parts are
missing or damage, please call your distributor
Important
Read these instructions carefully before
operating this tool.
Keep these instructions in a safe accessible place.
Product Type:
PNEUMATIC DOOR SKIN REMOVER TOOL
www.astrotools.com
1 YEAR LIMITED WARRANTY
•Astro Pneumatic Tool Co. warrants our products to the original user against
defective material or workmanship for a period of 1 year (except where noted on our
price schedule) from the date of 1st use. Astro reserves the right to determine
whether the product failed because of defective material, workmanship or other
causes and to charge back for missing parts. Astro Pneumatic Tool Co., at its
discretion, will repair products covered under this warranty free of charge. The
distributor should direct the original user to return the product (with the exceptions
listed below) with the distributor's name, address, adequate proof of date of
purchase or a copy of warranty card, and a short note explaining the problem.
Failures caused by accident, alteration, or misuse are not covered by this
warranty.
•Astro Pneumatic Tool Co. or its authorized service representatives must perform all
warranty repairs. Any repair to the product by unauthorized service representatives
voids this warranty. The rights under this warranty are limited to the original user and
may not be transferred to subsequent owners.
•This warranty is in lieu of all other warranties, expressed or implied, including
warranties of merchantability and fitness for a particular purpose. Some states do
not allow the exclusion of limitations of incidental or consequential damages so the
above limitations may not apply to you. All claims must be sent to:
Astro Pneumatic Tool Company
372 Old US Highway 52 South
Mt. Airy, NC 27030
PLEASE CALL 1-800-221-9705
FOR REPAIR AND RETURN INSTRUCTIONS
PNEUMATIC DOOR SKIN REMOVER TOOL
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the DS2000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Astro Pneumatic Tool DS2000

  • Page 1 Astro Pneumatic Tool Co., at its with this product. Failure to read and follow all discretion, will repair products covered under this warranty free of charge.
  • Page 2 • Elimination of damage to the frame of the door skin eliminates additional labor to repair the damage. • The reduction in labor, results in a very short payback period on your investment. In many cases the "DS2000" tool pays...
  • Page 3 The inside edge of the un-crimping head must be kept parallel to the edge of the door. In other words, the body of the DS2000 must be kept at a 20 degree angle to the door edge. This angle of operation will keep your hand free of the ragged steel edge as you move the tool.
  • Page 4: Maintenance Instruction

    Model: DS2000 8) Slip/Trip/Fall is a major reason of serious injury or death. Beware of excess hose left on the walking or work surface. Maintenance instruction: 9) Wearing eye/face protector could reduce the danger to person from high speed splinters being emitted from the tool or work surface.
  • Page 5 DS2000 372 Old US Highway 52 South Mount Airy, NC 27030 Call 1.800.221.9705 for questions concerning performance of the product or other inquiries. Index Index DS2000-01 Motor Housing DS2000-26 Retainer Ring DS2000-02 Lever DS2000-27 Needle DS2000-03 DS2000-28 Needle Plate DS2000-04...
  • Page 6 Product Type: Model: DS2000 PNEUMATIC DOOR SKIN REMOVER TOOL Foreseen Use of the Tool Do not use the tool outside of the design intent. Never modify the tool for any other purpose, or for its use. ASTRO PRODUCTS AVAILABLE FOR AIR FILTRATION:...