Troubleshooting
Status
Battery life is short
You cannot take a
picture
Error message appears
on LCD
Memory card not
recognized or camera
freezes with card.
Computer/connectivity problems
Status
Computer does not
communicate with
the camera
48
Solution
■
Make sure the correct battery type is installed
■
Wipe the contacts with a clean, dry cloth before inserting a
battery in the camera.
■
Insert a new or charged battery
■
Turn the camera off, then on again. Make sure the camera is not
in Favorites mode.
■
Depress the Shutter button all the way
■
Insert a new or charged battery
■
Memory is full. Transfer pictures to the computer
delete pictures
insert another card.
■
Turn the camera off, then on again.
■
Remove the memory card.
■
Turn off the camera. Remove the battery. Wipe the contacts with
a clean, dry cloth.
■
Insert a new or charged battery.
■
If the problem still exists, get help
■
Card may be corrupted. Format the card in the camera. (See the
"Customizing your camera" table starting on
■
Use another memory card.
Solution
■
Make sure the battery is charged and installed correctly
■
Turn on the camera.
■
Make sure the USB cable model U-8 is connected to the camera
and the computer
all cable connections. Make sure the camera is seated on the
dock.)
■
Make sure EasyShare software is installed
(page
(page
(page
17), change image storage location, or
(page
43). (If using an EasyShare dock, check
www.kodak.com/go/support
(page
59).
1).
(page
5).
1).
(page
(page
51).
page
32.)
(page
42).
42),
(page
1).