Getting Started
Operating the TV
Getting Started
>
Connecting the TV
Cable System or VHF/UHF Antenna System
You can enjoy high-definition and standard-definition digital programming (if available in your area) along
with standard-definition analog programming.
This TV is capable of receiving unscrambled digital programming for both cable (QAM and 8VSB) and
external VHF/UHF antenna (ATSC).
It is strongly recommended that you connect the CABLE/ANTENNA input using a 75-ohm coaxial cable
to receive optimum picture quality. A 300-ohm twin lead cable can be easily affected by radio
frequency interference, resulting in signal degradation.
Cable System and VHF/UHF Antenna System
Use an optional A-B RF switch (not supplied) to switch between the cable and
over-the-air antenna programming.
Be sure to set the Cable setting to Cable or Antenna in the
signal you choose.
Back to Connecting the TV
Home | Getting Started | Operating the TV | Using Features | Using the Menus | Other Information | Specifications
Using Features
> Cable System or/and VHF/UHF Antenna System
Channel menu
Copyright © 2009 Sony Electronics Inc. All rights reserved.
Using the Menus
for the type of input
Other Information
Specifications
Cable or VHF/UHF (or VHF only)
Next to HD Cable Box/HD Satellite Box