Advertisement
Attention:
1. Always disconnect the heater from the electricity supply and allow it to cool before attempting to
work on it.
2. If the heater has collected dust or dirt inside the unit or around the heating element, have the
unit cleaned by a qualified service agent. Do not operate the heater in this condition.
3. The only maintenance required is the cleaning of the external surfaces of the heater.
4. Do not touch the heating element with bare fingers, as residue from your hand could affect the
life of the lamp. If it is accidentally touched, remove the finger marks with a soft cloth, moistened
with mentholated spirit or alcohol.
5. Do not attempt to repair or adjust any electrical or mechanical functions on this heater.
6. The heater contains no user serviceable parts. Should the product suffer damage or breakdown,
it must be returned to the manufacturer or its service agent.
7. Damaged supply cords are to be replaced by the manufacturer, service agent or similarly
qualified person in order to avoid hazard.
Recycling
At the end of the electrical products life, it should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer for recycling advice
in your country.
Page 5
Advertisement
