Table of Contents
Advertisement
2) Set
Satellite
for the selected LNB.
– Select
No Satellite
(Available satellite will be searched in
– Select
User defined
– If you set to
Band,
User Band Frequency
Cable router you use). For details, read the manual of the Single
Cable router.
Watching > Tuning and editing channels > Selectable satellites
5. Press
BACK/RETURN
6. Select
Auto Setup
7. Select
Search Mode
8. Set with
/
and press
Scan Mode
●
Full:
Scans the whole frequency range.
Quick:
Scans the suitable frequency for the selected satellite.
After settings, select
●
9. The confirmation screen is displayed and press
(Settings are made automatically.)
When the operation is completed, the channel at the lowest position will
●
be displayed.
if you do not know the connected satellite.
to set
Test Transponder Frequency
Single
Cable, additional settings are required. Set
and
to store.
with
/
and press
/
Scan Mode
with
OK
to store.
Start scan
with
- 90 -
Auto
Setup.)
PIN
(depending on the Single
OK
to access.
/
and press
OK
/
and press
OK
OK
to start
Auto
manually.
User
to access.
to search.
Setup.
Advertisement
Table of Contents
