Cole & Bright Security 63729 Manual

Solar powered and linkable maxima security light

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

SOLAR POWERED + LINKABLE

MAXIMA SECURITY LIGH

MAXIMA SECURITY LIGHT

with

LINKABLE

IMPORTANT INFORMATION

PORTANT INFORMATION

• Keep these instructions safe for future reference.

eep these instructions safe for future reference

• Your motion light and solar panel are both weatherproof.

• You can mount your motion light indoors, but your solar panel must be

installed outdoors to receive light from the sun.

• If using a step ladder, you may require a second person to help install

the solar motion light.

• Prior to installation, lay out all the components and check the part list

section in this manual.

• Never look directly into the solar motion light when illuminated.

• If you locate your light in the vicinity of windows or glass doors,

movement may trigger the sensor to turn the lights on. Locate your lights

with this in mind.

IMPORTANT: READ ALL SAFETY INFORMATION AND INSTALLATION

INSTRUCTIONS BEFORE INSTALLING OR SERVICING THIS PRODUCT.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

360°

63729

Table of Contents

Need help?

Do you have a question about the Security 63729 and is the answer not in the manual?

Questions and answers

Summary of Contents for Cole & Bright Security 63729

Page 1 63729 SOLAR POWERED + LINKABLE MAXIMA SECURITY LIGHT MAXIMA SECURITY LIGH MAXIMA SECURITY LIGH with with 360° LINKABLE IMPORTANT INFORMATION PORTANT INFORMATION • Keep these instructions safe for future reference. eep these instructions safe for future reference • Your motion light and solar panel are both weatherproof. •...
Page 2 Introducing 360° LINKABLE Radar 360° + LINKABLE is the new next-generation solar sensor light from Cole & Bright. The new “LINKABLE” technology turns a single security light into a potential chain of security lights. Radar 360° + LINKABLE requires no wires, hardware, or additional components - just another Radar 360°...
Page 3 OPERATING INSTRUCTIONS The switch located on the bottom of the solar light housing is to turn on the product and also to link your Radar 360˚ linkable lights together (if you are creating a linked network) CHARGING YOUR RADAR 360˚ LIGHTS FOR THE FIRST TIME 1.
Page 4 LINKING YOUR RADAR 360˚ LIGHTS FOR THE FIRST TIME Only TWO (2) Lights (con’t) 4. On the Master light move the switch located in between the two lights to “M” position. 5. On the Secondary Light move the switch on the base to “S”...
Page 5 IF YOU WANT YOUR RADAR 360˚ LIGHTS UNLINKED Radar 360˚ lights can be linked to other Radar 360˚ Linkable lights OR used unlinked on a standalone basis. Standalone Basis If never previously linked simply charge your light and set to “M”...
Page 6 TOOLS REQUIRED TO INSTALL (not included) Electric Phillips Pencil Ladder Level Power Drill Screwdriver Protection PARTS LIST wall inserts phillips screws solar panel light unit GENERAL PRECAUTIONS Keep out of reach of children. PRE-INSTALLATION • • Carefully remove the ﬁ xture from carton and check that all parts are included. Carefully remove the ﬁ...
Page 8 If you are doing any of the following go to the locations below for detailed instructions - LINKING 3 OR MORE LIGHTS (FOR THE FIRST TIME) LINKING 3 OR MORE LIGHTS (FOR THE FIRST TIME) ADDING A NEW LIGHT(S) TO THE LINKED NETWORK ADDING A NEW LIGHT(S) TO THE LINKED NETWORK ADDING A NEW LIGHT(S) TO THE LINKED NETWORK ADDING A NEW LIGHT(S) TO THE LINKED NETWORK...